Arc welding
440996
220510091
2008-06-20T05:41:44Z
Anthony Appleyard
119438
/* Safety issues */ sorting
[[Image:SMAW.welding.af.ncs.jpg|thumb|200px|right|[[Gas metal arc welding]]]]
'''Arc welding''' uses a [[welding power supply]] to create an [[electric arc]] between an electrode and the base material to melt the metals at the welding point. They can use either [[Direct current|direct]] (DC) or [[Alternating current|alternating]] (AC) current, and consumable or non-consumable [[electrode]]s. The welding region is sometimes protected by some type of inert or semi-[[inert gas]], known as a [[shielding gas]], and/or an evaporating filler material. The process of arc welding is widely used because of its low capital and running costs.
==Development==
While examples of [[forge welding]] go back to the [[Bronze Age]] and the [[Iron Age]], arc welding did not come into practice until much later. In 1800, [[Humphry Davy]] discovered the [[electric arc]], initiating the development of arc welding which continued with the inventions of metal electrodes by a Russian ([[N.G. Slavianoff]]) and an American ([[C.L. Coffin]]) in the late 1800s even as [[carbon arc welding]], which used a [[carbon]] electrode, gained popularity. Around 1900, [[A. P. Strohmenger]] released in [[United Kingdom|Britain]] a coated metal electrode which gave a more stable arc. In 1919, [[alternating current]] welding was invented by [[C.J. Holslag]] but did not become popular for another decade.<ref name="Cary">Cary, Howard B. and Scott C. Helzer ([[2005]]). Modern Welding Technology. Upper Saddle River, [[New Jersey]]: Pearson Education. ISBN 0131130293 p. 5-6.</ref>
Competing welding processes such as [[resistance welding]] and [[oxyfuel welding]] were developed during this time as well,<ref>Cary & Helzer, p. 6</ref> but both, especially the latter, faced stiff competition from arc welding especially after metal coverings (known as [[Flux (metallurgy)|flux]]) for the electrode, to stabilize the arc and shield the base material from impurities, continued to be developed. <ref>Weman, Klas (2003). Welding processes handbook. New York: CRC Press LLC. ISBN 0-8493-1773-8. p. 26.</ref> During the surge in the use of welding caused by [[World War I]], arc welding became even more popular as the British constructed a ship, the ''[[Fulagar]]'', with an entirely welded hull. The Americans also became more accepting of the new technology when the process allowed them to repair their ships quickly after a [[Germany|German]] attack in the [[New York Harbor]] at the beginning of the war. Arc welding was first applied to aircraft during the war as well, and some German airplane fuselages were constructed using this process.<ref> [[Lincoln Electric]] ([[1994]]). The Procedure Handbook of Arc Welding. [[Cleveland]]: Lincoln Electric. ISBN 99949-25-82-2. p. 1.1-5. </ref>
During the 1920s, major advances were made in welding technology, including the 1920 introduction of automatic welding in which electrode wire was continuously fed. [[Shielding gas]] became a subject receiving much attention as scientists attempted to protect welds from the effects of oxygen and nitrogen in the atmosphere. Porosity and brittleness were the primary problems and the solutions that developed included the use of [[hydrogen]], [[argon]], and [[helium]] as welding atmospheres.<ref>Cary & Helzer, p. 7.</ref> During the following decade, further advances allowed for the welding of reactive metals such as [[aluminum]] and [[magnesium]]. This, in conjunction with developments in automatic welding, alternating current, and fluxes fed a major expansion of arc welding during the 1930s and then during [[World War II]].<ref>Lincoln Electric, 1.1-6.</ref>
During the middle of the century, many new welding methods were invented. [[Submerged arc welding]] was invented in 1930 and continues to be popular today. [[Gas tungsten arc welding]], after decades of development, was finally perfected in 1941 and [[gas metal arc welding]] followed in 1948, allowing for fast welding of non-[[ferrous]] materials but requiring expensive shielding gases. Using a consumable electrode and a [[carbon dioxide]] atmosphere as a shielding gas, it quickly became the most popular metal arc welding process. In 1957, the [[flux-cored arc welding]] process debuted in which the self-shielded wire electrode could be used with automatic equipment, resulting in greatly increased welding speeds. In that same year, [[plasma arc welding]] was invented. [[Electroslag welding]] was released in 1958 and was followed by its cousin, [[electrogas welding]], in 1961.<ref>Cary and Helzer, p. 9</ref>
==Power supplies==
[[Image:Welding power supply-Miller-Syncrowave350LX-front-triddle.jpg|thumb|right|250px|A constant current welding power supply capable of AC and DC]]
To supply the electrical energy necessary for arc welding processes, a number of different power supplies can be used. The most common classification is constant [[electrical current|current]] power supplies and constant [[voltage]] power supplies. In arc welding, the voltage is directly related to the length of the arc, and the current is related to the amount of heat input. Constant current power supplies are most often used for manual welding processes such as gas tungsten arc welding and shielded metal arc welding, because they maintain a relatively constant current even as the voltage varies. This is important because in manual welding, it can be difficult to hold the electrode perfectly steady, and as a result, the arc length and thus voltage tend to fluctuate. Constant voltage power supplies hold the voltage constant and vary the current, and as a result, are most often used for automated welding processes such as gas metal arc welding, flux cored arc welding, and submerged arc welding. In these processes, arc length is kept constant, since any fluctuation in the distance between the wire and the base material is quickly rectified by a large change in current. For example, if the wire and the base material get too close, the current will rapidly increase, which in turn causes the heat to increase and the tip of the wire to melt, returning it to its original separation distance.<ref> Cary and Helzer, p. 246-49.</ref>
The direction of current used in arc welding also plays an important role in welding. Consumable electrode processes such as shielded metal arc welding and gas metal arc welding generally use direct current, but the electrode can be charged either positively or negatively. In welding, the positively charged [[anode]] will have a greater heat concentration and, as a result, changing the polarity of the electrode has an impact on weld properties. If the electrode is positively charged, it will melt more quickly, increasing weld penetration and welding speed. Alternatively, a negatively charged electrode results in more shallow welds.<ref>
Kalpakjian, Serope and Steven R. Schmid ([[2001]]). Manufacturing Engineering and Technology. Prentice Hall. ISBN 0-201-36131-0.
p. 780.</ref> Non-consumable electrode processes, such as gas tungsten arc welding, can use either type of direct current, as well as alternating current. With direct current however, because the electrode only creates the arc and does not provide filler material, a positively charged electrode causes shallow welds, while a negatively charged electrode makes deeper welds.<ref>Lincoln Electric, 5.4.5.</ref> Alternating current rapidly moves between these two, resulting in medium-penetration welds. One disadvantage of AC, the fact that the arc must be re-ignited after every zero crossing, has been addressed with the invention of special power units that produce a [[square wave]] pattern instead of the normal [[sine wave]], eliminating low-voltage time after the zero crossings and minimizing the effects of the problem.<ref>Weman, p. 16.</ref>
==Consumable electrode methods==
[[Image:SMAW.welding.navy.ncs.jpg|thumb|right|250px|Shielded metal arc welding]]
One of the most common types of arc welding is [[shielded metal arc welding]] (SMAW), which is also known as manual metal arc welding (MMA) or stick welding. An electric current is used to strike an arc between the base material and a consumable electrode rod or 'stick'. The electrode rod is made of a material that is compatible with the base material being welded and is covered with a [[Flux (metallurgy)|flux]] that protects the weld area from [[oxidation]] and contamination by producing [[carbon dioxide|CO<sub>2</sub>]] gas during the welding process. The electrode core itself acts as filler material, making a separate filler unnecessary. The process is very versatile, requiring little operator training and inexpensive equipment. However, weld times are rather slow, since the consumable electrodes must be frequently replaced and because slag, the residue from the flux, must be chipped away after welding.<ref>Weman, 63.</ref> Furthermore, the process is generally limited to welding ferrous materials, though specialty electrodes have made possible the welding of [[cast iron]], [[nickel]], [[aluminium]], [[copper]] and other metals. The versatility of the method makes it popular in a number of applications including repair work and construction.<ref>Cary & Helzer, p. 103.</ref>
[[Gas metal arc welding]] (GMAW) is a semi-automatic or automatic welding process that uses a continuous wire feed as an electrode and an inert or semi-inert [[shielding gas]] to protect the weld from contamination. When using an inert gas as shield it is known as Metal Inert Gas (MIG) welding. A constant [[voltage]], [[direct current]] power source is most commonly used with GMAW, but constant [[Current (electricity)|current]] systems as well as [[alternating current]] can be used. GMAW welding speeds are relatively high due to the automatically fed continuous electrode, but is less versatile because it requires more equipment than the simpler SMAW process. Originally developed for welding [[aluminium]] and other non-ferrous materials in the 1940s, GMAW was soon applied to [[steel]]s because it allowed for lower welding time compared to other welding processes. Today, GMAW is commonly used in industries such as the [[automobile industry]], where it is preferred for its versatility and speed. Because it employs a shielding gas, however, it is rarely used outdoors or in areas of air volatility.<ref>Lincoln Electric, 5.4.3.</ref>
A related process, [[flux-cored arc welding]] (FCAW), uses similar equipment but uses wire consisting of a steel electrode tube surrounding a powder fill material. This cored wire is more expensive than the standard solid wire and generates extra shielding gas and/or slag, but it permits higher welding speed and greater metal penetration.<ref>Weman, p. 53.</ref>
[[Submerged arc welding]] (SAW) is a high-productivity automatic welding method in which the arc is struck beneath a covering layer of flux. This increases arc quality, since contaminants in the atmosphere are blocked by the flux. The slag that forms on the weld generally comes off by itself and, combined with the use of a continuous wire feed, the weld deposition rate is high. Working conditions are much improved over other arc welding processes since the flux hides the arc and no smoke is produced. The process is commonly used in industry, especially for large products. <ref>Weman, p. 68.</ref> As the arc is not visible, it requires full automatization. In-position welding is not possible with SAW.
==Non-consumable electrode methods==
[[Gas tungsten arc welding]] (GTAW), or tungsten inert gas (TIG) welding, is a manual welding process that uses a non-consumable electrode made of [[tungsten]], an inert or semi-inert gas mixture, and a separate filler material. Especially useful for welding thin materials, this method is characterized by a stable arc and high quality welds, but it requires significant operator skill and can only be accomplished at relatively low speeds. It can be used on nearly all weldable metals, though it is most often applied to [[stainless steel]] and light metals. It is often used when quality welds are extremely important, such as in [[bicycle]], aircraft and naval applications.<ref>Weman, p. 31.</ref> A related process, [[plasma arc welding]], also uses a tungsten electrode but uses [[Plasma (physics)|plasma gas]] to make the arc. The arc is more concentrated than the GTAW arc, making transverse control more critical and thus generally restricting the technique to a mechanized process. Because of its stable current, the method can be used on a wider range of material thicknesses than can the GTAW process and is much faster. It can be applied to all of the same materials as GTAW except [[magnesium]]; automated welding of stainless steel is one important application of the process. A variation of the process is [[plasma cutting]], an efficient steel cutting process.<ref>Weman, p. 37-38.</ref>
Other arc welding processes include [[atomic hydrogen welding]], [[carbon arc welding]], [[electroslag welding]], [[electrogas welding]], and [[stud arc welding]].
==Corrosion issues==
Some materials, notably high-strength steels, aluminium, and titanium alloys, are susceptible to [[hydrogen embrittlement]]. If the electrodes used for welding contain traces of moisture, the water decomposes in the heat of the arc and the liberated hydrogen enters the lattice of the material, causing its brittleness. Electrodes for such materials, with special low-hydrogen coating, are delivered in sealed moisture-proof packagings. New electrodes can be used straight from the can, but when moisture absorption may be suspected, they have to be dried by baking (usually at 800-1000 °F) in a drying oven. [[Flux (metallurgy)|Flux]] used has to be kept dry as well.<ref>[http://www.phx-international.com/moisture_article.html Drive Off Moisture and Get Better Welds]</ref>
Some [[austenitic]] [[stainless steel]]s and [[nickel]]-based [[alloy]]s are prone to [[intergranular corrosion]]. When subjected to temperatures around 700 °C for too long time, [[chromium]] reacts with [[carbon]] in the material, forming [[chromium carbide]] and depleting the crystal edges of chromium, impairing their corrosion resistance in a process called sensitization. Such sensitized steel undergoes corrosion in the areas near the welds where the temperature-time was favorable for forming the carbide. This kind of corrosion is often termed weld decay.
[[Knifeline attack]] (KLA) is another kind of corrosion affecting welds, impacting steels stabilized by [[niobium]]. Niobium and [[niobium carbide]] dissolves in steel at very high temperatures. At some cooling regimes, niobium carbide does not precipitate, and the steel then behaves like unstabilized steel, forming chromium carbide instead. This affects only a thin zone several millimeters wide in the very vicinity of the weld, making it difficult to spot and increasing the corrosion speed. Structures made of such steels have to be heated in a whole to about 1950 °F, when the chromium carbide dissolves and niobium carbide forms. The cooling rate after this treatment is not important.<ref>[http://httd.njuct.edu.cn/MatWeb/corrosie/c_iga.htm Intergranular Corrosion]</ref>
Filler metal (electrode material) improperly chosen for the environmental conditions can make them [[corrosion]]-sensitive as well. There are also issues of [[galvanic corrosion]] if the electrode composition is sufficiently dissimilar to the materials welded, or the materials are dissimilar themselves. Even between different grades of nickel-based stainless steels, corrosion of welded joints can be severe, despite that they rarely undergo galvanic corrosion when mechanically joined.<ref>[http://www.key-to-steel.com/Articles/Art160.htm Galvanic Corrosion]</ref>
==Safety issues==
Welding can be a dangerous and unhealthy practice without the proper precautions; however, with the use of new technology and proper protection the risks of injury or death associated with welding can be greatly reduced.
===Heat and sparks===
Because many common welding procedures involve an open electric arc or flame, the risk of burns is significant. To prevent them, [[welder]]s wear [[protective clothing]] in the form of heavy [[leather]] [[glove]]s and protective long sleeve jackets to avoid exposure to extreme heat, flames, and sparks.
===Eye damage===
The brightness of the weld area leads to a condition called [[arc eye]] in which [[ultraviolet light]] causes inflammation of the [[cornea]] and can burn the [[retina]]s of the eyes. [[Goggles]] and [[welding helmet|helmets]] with dark face plates are worn to prevent this exposure and, in recent years, new helmet models have been produced featuring a face plate that self-darkens upon exposure to high amounts of UV light. To protect bystanders, transparent welding curtains often surround the welding area. These curtains, made of a [[polyvinyl chloride]] plastic film, shield nearby workers from exposure to the UV light from the electric arc, but should not be used to replace the filter glass used in helmets.<ref>Cary & Helzer, p. 42, 49-51.</ref>
In 1970, a Swedish doctor, Åke Sandén, developed a new type of welding goggles that used a multilayer [[interference]] filter to block most of the light from the arc. He had observed that most welders could not see well enough, with the mask on, to strike the arc, so they would flip the mask up, then flip it down again once the arc was going: this exposed their naked eyes to the intense light for a while. By coincidence, the [[spectrum]] of an electric arc has a notch in it, which coincides with the yellow [[sodium]] line. Thus, a welding shop could be lit by [[sodium vapor lamp]]s or daylight, and the welder could see well to strike the arc. The Swedish government required these masks to be used for arc welding, but they were not used in the United States. They may have disappeared.<ref>''Papers of the International Shipyard Health Conference'', U.S.C. School of Medicine, 1973</ref>
===Inhaled matter===
Welders are also often exposed to dangerous gases and [[particulate]] matter. Processes like flux-cored arc welding and shielded metal arc welding produce [[smoke]] containing particles of various types of [[oxide]]s. The size of the particles in question tends to influence the [[toxic]]ity of the fumes, with smaller particles presenting a greater danger. Additionally, many processes produce various gases (most commonly carbon dioxide and [[ozone]], but others as well) that can prove dangerous if ventilation is inadequate. Furthermore, the use of compressed gases and flames in many welding processes pose an explosion and fire risk; some common precautions include limiting the amount of oxygen in the air and keeping combustible materials away from the workplace.<ref>Cary & Helzer, p. 52-62.</ref>
==See also==
* [[Robot welding]]
* [[Signature image processing]]
* [[Welder]]
==References==
<references/>
==Further reading==
*[[ASM International (society)]] ([[2003]]). Trends in Welding Research. Materials Park, [[Ohio]]: ASM International. ISBN 0-87170-780-2
*Blunt, Jane and Nigel C. Balchin ([[2002]]). Health and Safety in Welding and Allied Processes. [[Cambridge]]: Woodhead. ISBN 1-85573-538-5.
*Hicks, John ([[1999]]). Welded Joint Design. [[New York City|New York]]: Industrial Press. ISBN 0-8311-3130-6.
== External links ==
* [http://www.aws.org/ The American Welding Society]
* [http://www.cwa-acs.org Canadian Welding Association]
* [http://www.twi.co.uk/ The Welding Institute]
{{Metalworking - Welding}}
[[Category:Arc welding| ]]
[[Category:Welding]]
[[Category:Construction]]
[[Category:Robotics]]
[[Category:Electric arcs]]
[[ar:لحام القوس الكهربي]]
[[el:Ηλεκτροσυγκόλληση τόξου]]
[[es:Soldadura por arco]]
[[ja:アーク溶接]]
[[fi:Kaarihitsaus]]
[[ru:Электросварка]]