Ceramic engineering 4480666 226045490 2008-07-16T16:11:54Z 131.193.11.122 {{Globalize/USA}} {{Expert-verify|[[ceramics]] related article|date=May 2008}} '''Ceramic Engineering''' scks is the technology of manufacturing and usage of [[ceramic]] materials. Many engineering applications benefit from ceramics characteristics as a material. The characteristics of ceramics have garnered attention from engineers across the world, including those in the fields: [[Electrical Engineering]], [[Materials Engineering]], [[Chemical Engineering]], [[Mechanical Engineering]], and many others. Highly regarded for being resistant to heat, ceramics can be used for many demanding tasks that other materials like [[Metal]] and [[Polymers]] can not. Traditional ceramic raw materials include clay minerals such as kaolinite, more recent materials include aluminium oxide, more commonly known as alumina. The modern ceramic materials, which are classified as advanced ceramics, include silicon carbide and tungsten carbide. Both are valued for their abrasion resistance, and hence find use in applications such as the wear plates of crushing equipment in mining operations. Advanced ceramics are also used in the medicine, electrical and electronics industries. Ceramic Engineers are found in a wide variety of manufacturing, research and educational fields. These include mining, aerospace, medicine, refinery, food industry, chemical industry, packaging science, electronics, industrial electricity, and transmission electricity. == The Ceramic Process == A general definition of a ceramic material could be: A ceramic is any inorganic crystalline oxide material. It is solid and inert. Ceramic materials are brittle, hard, strong in compression, weak in shearing and tension. They withstand chemical erosion that occur in an acidic or caustic environment. In many cases withstanding erosion from the acid and bases applied to it. Ceramics generally can withstand very high temperatures such as temperatures that range from 1,000°C to 1,600°C (1,800°F to 3,000°F). Exceptions include inorganic materials that do not have oxygen such silicon carbide. Glass by definition is not a ceramic because it is an amorphous solid (non-crystalline). However, glass involves several steps of the ceramic process and its mechanical properties behave similarly to ceramic materials. The ceramic process generally follows this flow. Milling→ Batching→ Mixing→ Forming→ Drying→ Firing→ Assembly→ '''Milling''' is the process by which materials are reduced from a larger size to a smaller size. Milling may involve breaking up cemented material, thus the individual particle retain their shape or pulverization which involves grinding the particles themselves to a smaller size. Pulverization is actually fracturing the grains and breaking them down. Generally milling is done through mechanical means. The means include attrition which is particle to particle collision that results in agglomerate break up or particle shearing. Compression which is applying compressive forces that result in break-up or fracturing. Another means is impact which involves a milling media -or the particles themselves- that cause break up or fracturing. Examples of equipment that achieve attrition milling is a planetary mill or an wet attrition mill, also called wet scrubber. A wet scrubber is a machine that has paddles in water turning in opposite direction causing two vortexes turning into each other. The material in the vortex collide and break up. Equipment that achieve compression milling include a jaw crusher, roller crusher, and cone crushers. Finally impact mills may include a ball mill with media that tumble and fracture material. Shaft impactors cause particle to particle attrition and compression which achieve size reduction. '''Batching''' is the process by taking the oxides and weighing them according to recipes and proportions and preparing them for mixing and drying. '''Mixing''' occurs after batching and involve a variety of equipment such as for dry mixing ribbon mixers (a type of cement mixer), Mueller mixers, and pug mills. Wet mixing generally involve the same equipment. '''Forming''' is taking the batched and mixed material and making the material into a shape which can range from toilet bowls to insulators on a spark plug. The forming can involve extrusion such as in extruding "slugs" to make bricks. Pressing to make shaped parts. Slip casting as in making toilet bowls, wash basins and decorative ornamentals like ceramic statues. This step leads to a "green" part that is ready for drying. Green parts are soft plastic, pliable, and will over time lose its shape. The plasticity of green product means that when handled the product will change shape. For example a green brick can be "squeezed" and after squeezing it will stay that way. '''Drying''' is removing the water or binder from the formed material. [[Spray drying]] is widely used to prepare powder for pressing operations. Other dryers are tunnel dryers and periodic dryers. Controlled heat is applied in this process that takes two stages in the case where water is removed. First, heat removes physical water. This step needs careful control as rapid heating leads to cracks and surface defects. The dried part is now smaller than the green part and is now significantly brittle. These dried parts need to be handled carefully as little impact will cause crumbling and breaking. '''Firing''' is a process where the dried parts pass through a controlled heating process such that the oxides are chemically changed to where there is [[sintering]] and bonding. The fired part will be smaller than the dried part. '''Assembly''' This process is for parts that require additional subassembly parts. As in the case of a spark plug, the insulator is put onto an electrode that conducts a spark. This step does not apply to all ceramic products. == Ceramics Applications in Engineering == Ceramics can be used in many technological industries. One application are the ceramic tiles on [[NASA]]'s Space Shuttle, used to protect it and the future supersonic space planes from the searing heat of reentry into the earth's atmosphere. They are also used widely in electronics and optics. In addition to the applications listed here, ceramics are also used as a coating in various engineering cases. An example would be a ceramic bearing coating over a titanium frame used for an airplane. Recently the field has come to include the studies of single crystals or glass fibers, in addition to traditional [[Polycrystalline]] materials, and the applications of these have been overlapping and changing rapidly. ===Aerospace:=== *[[Engine]]s; Shielding a hot running airplane engine from damaging other components. *[[Airframe]]s; Used as a high-stress, high-temp and lightweight bearing and structural component. *Missile nose-cones; Shielding the missile internals from heat. *[[Space Shuttle]] tiles *Rocket Nozzles; Withstands and focuses the exhaust of the rocket booster. ===Biomedical:=== *Artificial bone; Dentistry applications, teeth. *[[Biodegradable]] splints; Reinforcing bones recovering from osteoporosis *Implant material ===Electronics and Electrical Industry:=== *[[Capacitor]]s *[[Integrated Circuit]] packages *[[Transducer]]s *[[Insulator]]s ===Optical/Photonic:=== *[[Optical]] fibers; Glass fibers for super fast data transmission. *[[Switches]] *[[Laser]] [[amplifier]]s *[[Lens (optics)|Lens]]es == History of Ceramics in Engineering == Ceramics Engineering, like many sciences, evolved from a different discipline by today's standards. Materials Engineering is grouped with Ceramics Engineering to this day. Universities with ceramics programs include a curriculum saturated with materials engineering classes. The modern day ceramic engineer may find themselves in a variety of industries. Similar to other disciplines a ceramic engineer may find themselves in mining and mineral processing, pharmaceuticals, foods, and chemical operations. Abraham Darby first used [[Coke (fuel)| coke]] in 1709 in Shropshire, England, to improve the yield of a smelting process. Coke is now widely used to produce carbide ceramics. Renowned potter [[Josiah Wedgwood]] opened the world's first modern ceramics factory in [[Stoke-on-Trent]], England, in 1759. Austrian chemist [[Karl Bayer]], working for the textile industry in Russia, developed a [[Bayer process| process]] to separate [[alumina]] from [[bauxite]] ore in 1888. The Bayer process is still used to purify alumina for the ceramic and aluminum industries. Brothers Pierre and Jacques [[Pierre Curie| Curie]] discovered [[piezoelectricity]] in Rochelle salt circa 1880 in Paris. Piezoelectricity is one of the key properties of [[electroceramics]]. [[Edward Goodrich Acheson| E.G. Acheson]] heated a mixture of coke and [[clay]] in 1893, and invented carborundum, or synthetic [[silicon carbide]]. Henri Moisson also synthesized SiC and [[tungsten carbide]] in his [[electric arc furnace]] in Paris about the same time as Acheson. Karl Schröter used liquid-phase [[sintering]] to bond or "cement" Moissan’s tungsten carbide particles with cobalt in 1923 in Germany. Cemented (metal-bonded) [[carbide]] edges greatly increase the durability of [[hardened steel]] cutting tools. [[Walther Nernst| W.H. Nernst]] developed [[Cubic zirconia| cubic]]-stabilized [[zirconia]] (CSZ) in the 1920s in Berlin. CSZ is used as an oxygen sensor in exhaust systems. W.D. Kingery and others in the 1950s developed partially-stabilized zirconia (PSZ), greatly increasing its [[toughness]]. PSZ is used to make cutlery and other tools. [[Lead zirconate titanate]] (PZT) was developed at the [[United States]] [[National Institute of Standards and Technology| National Bureau of Standards]] in 1954. PZT is used as an [[ultrasonic]] [[transducer]], as its piezoelectric properties greatly exceed those of Rochelle salt.<ref>John B. Wachtman, Jr., ed., ''Ceramic Innovations in the 20th Century'', The American Ceramic Society, 1999.</ref> The first ceramic engineering course and department in the [[United States]] were established by [[Edward Orton, Jr.]], a professor of geology and mining engineering, at the [[Ohio State University]] in 1894. Orton and eight other refractory professionals founded the [[American Ceramic Society]] (ACerS) at the 1898 National Brick Manufacturers' Association convention in Pittsburgh. Orton was the first ACerS General Secretary, and his office at OSU served as the society headquarters in the beginning. Charles F. Binns established the New York State School of Clay-Working and Ceramics, now [[Alfred University]], in 1900. Binns was the third ACerS president, and Orton the 32<sup>nd</sup>.<ref>''The American Ceramic Society: 100 Years'', American Ceramic Society, 1998, p 169-173, ISBN 1-888903-04-X.</ref> The Ceramic Society of Japan was founded in 1891 in Tokyo. ''Deutschen Keramischen Gesellschaft'', the ceramic society of Germany, was founded in Berlin in 1919. The [[military]] requirements of [[World War II]] (1939-1945) encouraged developments, which created a need for high-performance materials and helped speed the development of ceramic science and engineering. Throughout the 1960s and 1970's, new types of ceramics were developed in response to advances in atomic energy, electronics, communications, and space travel. The discovery of ceramic superconductors in 1986 has spurred intense worldwide research to develop superconducting ceramic parts for electronic devices, electric motors, and transportation equipment. Preceding the spark of the ceramic industry in the late 19th century, there was the study of materials closely associated with [[chemistry]]. Since Ceramics are comprised of a [[crystalline structure]], the knowledge of how crystals are formed and the strengths involved was important in the development of ceramics as a standalone scientific field. == Present Day Ceramics Engineering == Now a multi-billion dollar a year industry, ceramics engineering and research has established itself as an important field of science. Applications continue to expand as researchers develop new kinds of ceramics to serve different purposes. An incredible number of ceramics engineering products have made their way into modern life. The largest producers of engineered ceramics--and largest employers of ceramic engineers--include AVX, CeramTec, [[CoorsTek]], [[Corning Incorporated| Corning]], [[EDO Corporation| EDO]], [[Kohler Company| Kohler]], [[Kyocera]], [[Morgan Technical Ceramics| Morgan Crucible]], [[Murata Manufacturing| Murata]], [[Saint-Gobain]] and [[3M]]. ==Education== Many educational institutions in the United States offer degrees in this field, examples being the New York State College of Ceramics located at [[Alfred University]], and [[Rutgers University]], and there are several in other countries. Some of these institutions are planning to change the names of their disciplines to [[Materials science]], "Materials engineering" or Materials Science and Engineering (MS&E). Clemson University and the Missouri University of Science and Technology<ref>*{{cite web|url=http://campus.umr.edu/ceramics/030625_Cer_Eng_DnP.pdf |title=Ceramic Engineering at the University of Missouri-Rolla|accessdate=2007-10-07 |last=Brow |first=Richard K. |format=PDF |archivedate=2003-06-25|archiveurl=http://campus.umr.edu/ceramics/030625_Cer_Eng_DnP.pdf }}</ref> offer Ceramic Engineering Major & Materials Minor. ==See also== *[[Materials Engineering]] *[[Mechanical Engineering]] *[[Chemical Engineering]] *[[Ceramic]]s *[[Ceramography]] {{Portal|Engineering}} == Further reading == * ''Engineered Materials Handbook, Volume 4: Ceramics and Glasses'', [[ASM International]], 1991, ISBN 0-87170-282-7. * M.W. Barsoum, ''Fundamentals of Ceramics'', McGraw-Hill Co., Inc., 1997. * W.D. Callister, Jr., ''Materials Science and Engineering: An Introduction'', 5<sup>th</sup> Ed., John Wiley & Sons, Inc., 2000. * W.D. Kingery, H.K. Bowen and D.R. Uhlmann, ''Introduction to Ceramics'', John Wiley & Sons, Inc., 1976, ISBN 0-471-47860-1. * M.N. Rahaman, ''Ceramic Processing and Sintering'', 2<sup>nd</sup> Ed., Marcel Dekker Inc., 2003, ISBN 0-8247-0988-8. * J.S. Reed, ''Introduction to the Principles of Ceramic Processing'', John Wiley & Sons, Inc., 1988, ISBN 0-471-84554-X. * D.W. Richerson, ''Modern Ceramic Engineering'', 2<sup>nd</sup> Ed., Marcel Dekker Inc., 1992, ISBN 0-8247-8634-3. * W.F. Smith, ''Principles of Materials Science and Engineering'', 3<sup>rd</sup> Ed., McGraw-Hill, Inc., 1996. * L.H. VanVlack, Physical Ceramics for Engineers, Addison-Wesley Publishing Co., Inc., 1964. ==References== <references/> ==External links== * [http://www.ceramics.org The American Ceramic Society] {{Technology-footer}} =''''' [[Category:Materials science]] [[Category:Ceramics]] [[id:Teknologi keramik]]