Combined cycle
583901
225874077
2008-07-15T20:22:24Z
160.84.253.241
/* Fuel for combined cycle power plants */
A '''combined cycle''' is characteristic of a power producing engine or plant that employs more than one [[thermodynamic cycle]]. Heat engines are only able to use a portion of the energy their fuel generates (usually less than 50%). The remaining heat from combustion is generally wasted. Combining two or more "cycles" such as the [[Brayton cycle]] and [[Rankine cycle]] results in improved overall efficiency.
In a '''combined cycle''' power plant (CCPP), or combined cycle gas turbine (CCGT) plant, a [[gas turbine]] generator generates electricity and the waste heat is used to make steam to generate additional electricity via a [[steam turbine]]; this last step enhances the efficiency of [[electricity generation]]. Most new gas power plants in North America and Europe are of this type.
In a thermal [[power plant]], high-temperature [[heat]] as input to the power plant, usually from burning of [[fuel]], is converted to electricity as one of the outputs and low-temperature heat as another output. As a rule, in order to achieve high efficiency, the temperature difference between the input and output heat levels should be as high as possible (see [[Carnot efficiency]]). This is achieved by combining the [[Rankine cycle|Rankine]] (steam) and [[Brayton cycle|Brayton]] (gas) thermodynamic cycles. Such an arrangement used for marine propulsion is called ''[[Combined gas and steam|Combined Gas (turbine) And Steam (turbine)]] (COGAS)''.
==Design principle==
[[Image:COGAS-diagram.png|thumb|left|Working principle of a combined cycle power plant]]
In a [[thermal power station]] water is the working medium. High pressure steam requires strong, bulky components. High temperatures require expensive alloys made from [[nickel]] or [[cobalt]], rather than inexpensive [[steel]]. These alloys limit practical steam temperatures to 655 °C while the lower temperature of a steam plant is fixed by the boiling point of water. With these limits, a steam plant has a fixed upper efficiency of 35 to 42%.
An open circuit gas turbine cycle has a [[Gas compressor|compressor]], a [[combustor]] and a [[turbine]]. For gas turbines the amount of metal that must withstand the high temperatures and pressures is small, and lower quantities of expensive materials can be used. In this type of cycle, the input temperature to the turbine (the [[firing temperature]]), is relatively high (900 to 1,400 °C). The output temperature of the [[flue gas]] is also high (450 to 650 °C). This is therefore high enough to provide heat for a second cycle which uses steam as the working fluid; (a [[Rankine cycle]]).
In a combined cycle power plant, the heat of the gas turbine's exhaust is used to generate steam by passing it through a heat recovery steam generator ([[HRSG]]) with a [[live steam]] temperature between 420 and 580 °C. The condenser of the [[Rankine cycle]] is usually cooled by water from a lake, river, sea or [[cooling tower]]s. This temperature can be as low as 15 °C
===Efficiency of CCGT plants===
By combining both gas and steam cycles, high input temperatures and low output temperatures can be achieved. The efficiency of the cycles add, because they are powered by the same fuel source. So, a combined cycle plant has a thermodynamic cycle that operates between the gas-turbine's high firing temperature and the [[waste heat]] temperature from the condensors of the steam cycle. This large range means that the [[Carnot efficiency]] of the cycle is high. The actual efficiency, while lower than this is still higher than that of either plant on its own.
The thermal efficiency of a combined cycle power plant is the net power output of the plant divided by the heating value of the fuel. If the plant produces only electricity, efficiencies of up to 60% can be achieved. In the case of [[combined heat and power]] generation, the overall efficiency can increase to 85%.
===Supplementary firing and blade cooling===
The [[HRSG]] can be designed with supplementary firing of fuel after the gas turbine in order to increase the quantity or temperature of the steam generated. Without supplementary firing, the efficiency of the combined cycle power plant is higher, but supplementary firing lets the plant respond to fluctuations of electrical load. Supplementary burners are also called ''duct burners''.
More fuel is sometimes added to the turbine's exhaust. This is possible because the turbine exhaust gas (flue gas) still contains some [[oxygen]]. Temperature limits at the gas turbine inlet force the turbine to use excess air, above the optimal [[stoichiometric]] ratio to burn the fuel. Often in gas turbine designs part of the compressed air flow bypasses the burner and is used to cool the turbine blades.
==Fuel for combined cycle power plants==
Combined cycle plants are usually powered by [[natural gas]], although fuel oil, synthesis gas or other fuels can be used. The supplementary fuel may be natural gas, fuel oil, or coal. Integrated [[solar energy|solar]] combined cycle power stations are currently under construction at [[Hassi R'mel integrated solar combined cycle power station|Hassi R'mel]], [[Algeria]] and [[Ain Beni Mathar integrated solar combined cycle power station|Ain Beni Mathar]], [[Morocco]] <ref>[http://www.ecoreporter.de/index.php?action=,,121_n24638__ Abener has begun construction of the world's largest ISCC plant in Morocco]</ref>. Next generation nuclear power plants are also on the drawing board which will take advantage of the higher temperature range made available by the Brayton top cycle, as well as the increase in thermal efficiency offered by a Rankin bottoming cycle.
==Integrated Gasification Combined Cycle (IGCC)==<!-- This section is linked from [[Syngas]] -->
An [[Integrated Gasification Combined Cycle]], or IGCC, is a power plant using synthesis gas ([[syngas]]).
==Automotive use==
Combined cycles have traditionally only been used in large power plants. [[BMW]], however, has proposed that automobiles use exhaust heat to drive steam turbines.<ref>[http://www.autoblog.com/2005/12/09/bmw-turbosteamer-gets-hot-and-goes/ "BMW Turbosteamer gets hot and goes"] by John Neff, AutoBlog, December 9, 2005</ref> It may be possible to use the pistons in a reciprocating engine for both combustion and steam expansion like in the Crower 6-stroke.<ref>[http://www.autoweek.com/apps/pbcs.dll/article?AID=/20060227/FREE/302270007/1023/THISWEEKSISSUE "Inside Bruce Crower’s Six-Stroke Engine"] By Pete Lyons, AutoWeek, February 23, 2006</ref>
==Aeromotive use==
Some versions of the [[Wright R-3350]] were produced as "Turbo-compound" engines. Three turbines driven by exhaust gases, known as "Power recovery turbines", provided nearly 600 hp at takeoff. These turbines added power to the engine crankshaft through bevel gears and fluid couplings.<ref>[http://www.air-and-space.com/20020811%20Camarillo%20page%201.htm Goleta Air and Space Museum: 2002 Camarillo EAA Fly-in<!-- Bot generated title -->]</ref>
==See also==
* [[Heat recovery steam generator]]
* [[Mercury vapour turbine]]
==References==
<references />
{{Thermodynamic cycles|state=uncollapsed}}
==External links==
* [http://www.powergeneration.siemens.com/en/press/pg200303017e/index.cfm Hunstown: Ireland's most efficient power plant] @ [[Siemens AG|Siemens]] Power Generation website
* [http://www.westgov.org/wieb/electric/Transmission%20Protocol/SSG-WI/pnw_5pp_02.pdf Natural Gas Combined-cycle Gas Turbine Power Plants] Northwest Power Planning Council, New Resource Characterization for the Fifth Power Plan, August 2002
* [http://www.ingenia.org.uk/ingenia/articles.aspx?index=244&print=true Combined cycle solar power]
[[Category:Thermodynamic cycles]]
[[Category:Chemical engineering]]
[[Category:Power station technology]]
[[Category:Energy conversion]]
[[de:GuD-Kraftwerk]]
[[fr:Cycle combiné]]
[[nl:Stoom- en gascentrale]]
[[ja:コンバインドサイクル発電]]
[[pl:Układ gazowo-parowy]]
[[ru:Парогазовая установка]]