Instrument amplifier
319560
226083756
2008-07-16T19:26:03Z
OnBeyondZebrax
933709
/* Tube Amplifiers */ add free [oc
{{dablink|This page is about amplifiers for musical instruments. See also [[instrumentation amplifier]], a type of [[operational amplifier]].}}
An '''instrument amplifier''' is an [[electronic amplifier]] that converts the inaudible electric or electronic signal from musical instruments such as an [[electric guitar]], an [[bass guitar|electric bass]], or an [[Hammond organ|electric keyboard]] into sounds which can be heard by the performers and audience. Combination ("combo") amplifiers include a preamplifier, a power amplifier, tone controls, and one or more speakers in a cabinet, a housing usually made of plywood, particleboard, or, less commonly, moulded plastic. Instrument amplifiers for some instruments are also available without an integral speaker; these amplifiers have to be plugged into an external speaker cabinet.
Instrument amplifiers are available for specific instruments, including the electric guitar, electric bass, electric keyboards, and acoustic instruments such as the mandolin and banjo. Some amplifiers are designed for specific styles of music, such as the "traditional"-style "tweed" guitar amplifiers used by blues and country musicians, and the Marshall amplifiers used by hard rock and heavy metal bands.
Unlike [[AV reciever|home "hi-fi" amplifiers]] or [[Public Address system|public address system]]s, which are designed to accurately reproduce the source sound signals with as little harmonic distortion as possible, instrument amplifiers are often designed to add additional tonal coloration to the original signal or emphasize (or de-emphasize) certain frequencies. The two exceptions are keyboard amplifiers and "acoustic" instrument amplifiers, which typically aim for a relatively flat frequency response.
[[Image:Pink-Guitar-Amp.jpg|thumb|A Fender "combo" amplifier being picked up with a microphone in a recording studio.]]
==Types==
==="Traditional" amplifiers===
====Standard amps====
Standard amplifiers, such as the Fender "tweed"-style amps and Gibson amps, are often used by traditional rock, blues, and country musicians who wish to create a "vintage" 1950s-style sound. They are used by electric guitarists, [[pedal steel]] guitar players, and blues [[harmonica]] ("harp") players. Combo amplifiers such as the [[Fender Bassman]] have [[tube amplifier]]s, four 10" speakers, and built-in [[reverb]] and "[[vibrato]]" effects units.
These amps are designed to produce a variety of sounds ranging from a clean, warm sound (when used in country and soft rock) to a growling, natural overdrive, when the volume is set near its maximum, (when used for [[blues]], [[rockabilly]], and [[roots rock]]). These amplifiers usually have a sharp treble roll-off at 5 kHz to reduce the extreme high frequencies, and a bass roll-off at 60–100 Hz to reduce boominess. The nickname "tweed" refers to the lacquered beige-light brown fabric covering used on these amplifiers.
The smallest "combo" amplifiers, which are mainly used for rehearsal and warm-up purposes, may have only a single 8" or 10" speaker. Some harmonica players use these small combo amplifiers for concert performances, though, because it is easier to create natural overdrive with these lower-powered amplifiers. Larger combo amplifiers, with four 10" speakers are used for club performances. For large concert venues, performers may also use an amplifier "head" with several separate speaker cabinets (which usually contain four 10" Jensen or Eminence speakers).
[[Image:Gibson 1.jpg|thumb|A small Gibson "combo" amplifier.]]
====Other types====
The Roland "Jazz Chorus" amplifier is a two-channel "combo" amp which is often used by [[jazz guitarist]]s. It includes reverb and chorus, two [[guitar effects]] which are commony used by jazz guitarists. As well, it includes a [[distortion]] effect, which is used by [[jazz-rock]] fusion guitarists.
[[Image:JC-120UT.jpg|thumb| The Roland "Jazz Chorus" amplifier.]]
===Hard rock and heavy metal===
These electric guitar amplifiers add an aggressive "drive", intensity, and "edge" to the guitar sound with distortion effects, preamplification boost controls, and tone filters. While many of the most expensive, high-end models use [[tube amplifier]]s, there also many models that use transistor amplifiers, or a mixture of the two technologies (i.e., a tube preamplifier with a transistor power amplifier). Amplifiers of this type, such as [[Marshall amplifiers]], are used in a range of the louder, heavier genres of rock, including hard rock, [[heavy metal]], and [[hardcore punk]]. This type of amplifier is available in a range of formats, ranging from smaller combo amplifiers for rehearsal and warm-up purposes to heavy "heads" which are designed to be used with separate speaker cabinets, which is colloquially referred to as a "stack."
In the late 1960s and early 1970s, [[Public Address system|public address systems]] at rock concerts were used mainly for the vocals. As a result, to get a loud electric guitar sound, early [[heavy metal]] and rock-blues bands often used "stacks" of 4x12" Marshall speaker cabinets on the stage. In 1969 [[Jimi Hendrix]] used four stacks to create a powerful lead sound, and in the early 1970s by the band [[Blue Öyster Cult]] used an entire wall of Marshall Amplifiers to create a roaring wall of sound. In the 1980s, metal bands such as [[Slayer]] and [[Yngwie Malmsteen]] also used "walls" of over 20 Marshall cabinets. However, by the 1980s and 1990s, most of the sound at live concerts was produced by the [[sound reinforcement system]] rather than the onstage guitar amplifiers, so most of these cabinets were not connected to an amplifier. Instead, these walls of speaker cabinets were used for aesthetic reasons.
Amplifiers for harder, heavier genres often use valve amplifiers (known as "tube amplifiers" in North America). Valve amplifiers have a "warmer" tone than those of transistor amps, particularly when overdriven. Instead of abruptly clipping off the signal at cut-off and saturation levels, the signal is rounded off more smoothly. Vacuum tubes also exhibit different harmonic effects than transistors. In contrast to the "tweed"-style amplifiers, which use 10" speakers in an open-backed cabinet, companies such as Marshall tend to use 12" speakers in a closed-back cabinet. These amplifiers usually allow users to switch between "clean" and distorted tones (or a [[rhythm guitar]]-style "crunch" tone and a sustained [[lead guitar|"lead"]] tone) with a foot-operated switch.
[[Image:MarkIV.jpg|thumb|A Mesa-Boogie "Mark IV" amplifier, a popular amp in the heavy metal scene.]]
[[Image:Orange AD30HTC and PPC412.jpg|thumb|An "Orange" brand speaker cabinet and separate amplifier "head" with its distinctive orange Tolex covering.]]
===Bass===
[[Bass instrument amplification|Bass amplifiers]] are designed for [[bass guitar]]s or more rarely, for [[double bass|upright bass]]. They differ from amplifiers for the regular electric guitar in several respects. They have extended bass response and tone controls optimised for bass instruments, which produce pitches of 40 Hz, in the case of a standard four-string electric bass, or even lower for five- or six-string electric basses.
Higher-end bass amplifiers sometimes include compressor or limiter features, which help to keep the amplifier from distorting at high volume levels, and an XLR DI output for patching the bass signal directly into a mixing board or PA systems. Larger, more powerful bass amplifiers (300 or more watts) are often provided with external metal heat sinks or fans to help keep the amplifier cool.
[[Image:Bassstack.jpg|thumb|100px|A 2 x 10" bass speaker cabinet stacked on top of a 15" cabinet, with separate bass amplifier "head" unit]]
Speaker cabinets designed for bass instrument amplification usually use larger [[loudspeakers]] (or more loudspeakers, in the case of the popular 4 X 10" cabinets, which contain four 10" speakers) than the cabinets used for other instruments, so that they can move the larger amounts of air needed to reproduce low frequencies. While the largest speakers commonly used for regular electric guitar are 12" speakers, electric bass speaker cabinets often use 15" speakers. Bass players who play styles of music that require an extended low-range response, such as [[death metal]], sometimes use speaker cabinets with 18" speakers.
The speakers used for bass instrument amplification tend to be more heavy-duty than speakers used for regular electric guitar, and the speaker cabinets are typically more rigidly constructed and heavily braced, to prevent unwanted buzzes and rattles. Bass cabinets often include [[bass reflex]] ports or openings in the cabinet, which improve the bass response, especially at high volumes.
===Keyboard===
This type of amplifier is used to amplify a range of electric and electronic keyboards, such as [[synthesizer]]s, [[Hammond organ|Hammond organ-style keyboards]], [[stage piano]]s and [[electric piano]]s. Since keyboard instruments contain a wide frequency range, from very low bass notes to extremely high pitches, keyboard amplifiers are often provided with a large [[woofer]] speaker to handle the low notes and a horn (or tweeter) for the high notes.
Keyboard amplifiers intended for general use for a range of keyboard applications usually have very low distortion and extended, flat frequency response in both directions. The exception to this rule is keyboard amplifiers designed for the Hammond organ, such as the vintage Leslie speaker cabinet and modern recreations, which have a [[tube amplifier]] which is often turned up to add a warm, "growling" [[overdrive]] to the organ sound.
Unlike bass amplifiers and electric guitar amplifiers, keyboard amplifers are rarely used in the "amplifier head" and separate speaker cabinets configuration. Instead, most keyboard amplifiers are "combo" amplifiers that integrate the amplifier, tone controls, and speaker into a single wooden cabinet. Another unusual aspect of keyboard amplifiers is that they are often designed with a "wedge" shape, as used with monitor speakers. This allows the cabinet to be rocked back so that it will project sound upwards at a roughly 45' angle, which is more suitable for a seated keyboardist.
Keyboard amplifiers often have a simple onboard mixer, so that keyboardists can control the tone and level of several keyboards. In some genres, such as [[progressive rock]], for example, keyboardists may perform with several synthesizers, electric pianos, and electro-mechanical keyboards.
[[Image:Amplifier1.jpg|thumb|A small amp capable of mixing the inputs from two keyboards. This amplifier would be suitable for at-home practice, but it would not be loud enough for a rehearsal or performance.]]
===Acoustic===
These amplifiers are designed to be used with acoustic instruments such as violin ("fiddle"), mandolin, and acoustic guitar, especially for the way these instruments are used in relatively quiet genres such as [[folk]] and [[Bluegrass music|bluegrass]]. They are similar in many ways to keyboard amplifiers, in that they have a relatively flat frequency response, and they are usually designed so that neither the power amplifier nor the speakers will introduce additional coloration.
To produce this relatively "clean" sound, these amplifiers often have very powerful amplifiers (providing from 400 to 800 watts RMS), to provide additional "headroom" and prevent unwanted distortion. Since an 800 watt amplifier built with standard [[Class AB]] technology would be very heavy, some acoustic amplifier manufacturers use lightweight [[Class D]] amplifiers, which are also called "switching amplifiers."
Acoustic amplifiers are designed to produce a "clean", transparent, "acoustic" sound when used with acoustic instruments with built-in transducer [[Pickup (music)|pickup]]s and/or microphones. The amplifiers often come with a simple mixer, so that the signals from a pickup and microphone can be blended. Since the early 2000s, it has become increasingly common for acoustic amplifiers to be provided with a range of digital effects, such as [[reverb]] and [[compression]]. As well, these amplifiers often contain [[feedback]]-suppressing devices, such as [[notch filter]]s or [[parametric equalizer]]s. <ref>Note: This style of amplifiers should not be confused with the brand of guitar and bass amplifiers called [[Acoustic Control Corporation|Acoustic]], still available in second-hand music stores.)</ref>
==Roles==
Instrument amplifiers are designed for a different purpose than 'Hi-Fi' (high fidelity) [[stereo]] amplifiers used for radios and home stereo systems. Hi-fi home stereo amplifiers are designed to accurately reproduce the source sound signals from pre-recorded music, with as little harmonic distortion as possible. In contrast, instrument amplifiers are often designed to add additional tonal coloration to the original signal or emphasize certain frequencies. For electric instruments such as electric guitar, the amplifier helps to create the instrument's tone by boosting the input signal gain and distorting the signal, and by emphasizing frequencies deemed to be desirable (e.g., low frequencies) and de-emphasizing frequencies deemed to be undesirable (e.g., very high frequencies).
The two exceptions are keyboard amplifiers and acoustic amplifiers which are used by [[folk]] and [[bluegrass music]]ians for amplifying acoustic instruments such as acoustic guitar, violin, and [[mandolin]]. Acoustic amplifiers typically aim for a relatively flat response across the entire frequency range, much like a [[Public Address system]].
===Size and power rating===
In the 1960s and 1970s, large, heavy, high output power amplifiers were preferred for instrument amplifiers, especially for large concerts, because [[public address system]]s were generally only used to amplify the vocals. Moreover, in the 1960s, PA systems typically did not use monitor speaker systems to amplify the music for the onstage musicians. Instead, the musicians were expected to have instrument amplifiers that were powerful enough to provide amplification for the stage and audience. In late 1960s and early 1970s rock concerts, bands often used large stacks of speaker cabinets powered by heavy tube amplifiers such as the [[Ampeg SVT|Super Valve Technology (SVT)]] amplifier, which was often used with eight 10" speakers.
However, over subsequent decades, PA systems were substantially improved, and different approaches such as horn-loaded "bass bins" (in the 1980s) and subwoofers (1990s and 2000s) were used to amplify bass frequencies. As well, in the 1980s and 1990s, monitor systems were substantially improved, which allowed sound engineers to provide onstage musicians with a loud, clear, and full-range reproduction of their instruments' sound.
As a result of the improvements to PA systems and monitor systems, musicians in the 2000s no longer need to have huge, powerful amplifier systems; a small combo amplifier patched into the PA will suffice. In the 2000s, virtually all of the sound reaching the audience in large venues comes from the [[PA system]]. As well, in the 2000s onstage instrument amplifiers are more likely to be kept at a low volume, because high volume levels onstage makes it harder to control the sound mix and produce a clean sound.
As a result, in many large venues much of the onstage sound reaching the musicians now comes from the monitor speakers, not from the instrument amplifiers. While stacks of huge speaker cabinets and amplifiers are still used in concerts (especially in heavy metal), this is often mainly for aesthetics or to create a more authentic tone. The switch to smaller instrument amplifiers makes it easier for musicians to transport their equipment to performances. As well, it makes concert stage management easier at large clubs and festivals where several bands are performing in sequence, because the bands can be moved on and off the stage more quickly.
==Amplifier technology ==
Instrument amplifiers may be based on [[thermionic]] ("tube" or "valve") or [[solid state (electronics)|solid state]] (transistor) technology.
====Tube Amplifiers====
Vacuum tubes were the dominant active electronic components in amplifiers from the 1940s and 1950s, and tube amplifers continue to be used for higher-end bass amplifers. Some musicians believe that tube amplifiers produce a "warmer" or more "natural" sound than solid state amps. However, these subjective assessments of the attributes of tube amps' sound qualities are the subject of ongoing debate.
The perception that tube amps produce a "warmer" sound may be due to the "soft clipping" gain non-linearity that tube amps exhibit. Even though tube amplifiers produce more heat than solid state amplifiers, few manufacturers of tube amplifiers include cooling fans in the amplifiers' chassis. While tube amplifers do need to attain a proper operating temperature, if the temperature goes above this operating temperature, it may shorten the tubes' lifespan and lead to tonal inconsistencies. <ref>[http://72.14.203.104/search?q=cache:c7BJeOkqVIIJ:www.chitown.com/http/music/Musictips.html+cooling+tube+amplifier&hl=en&gl=ca&ct=clnk&cd=25 ''Cool it, man''; Michael "Mac" McCullough.]</ref>
[[Image:Trace Elliot Bonneville rear view.jpg|thumb |A [[Trace Elliot]] "Bonneville" tube amplifier as seen from the rear view: note the vacuum tubes extending into the wooden cabinet.]]
====Solid State Amplifiers====
By the 1960s and 1970s, semiconductor transistor-based amplifiers began to become more popular because they are less expensive, lighter-weight, and require less maintenance. In some cases, tube and solid state technologies are used together in amplifiers. A common setup is the use of a tube preamplifier with a solid state power amplifier. There are also an increasing range of products that use [[digital signal processing]] and digital modeling technology to simulate many different combinations of amp and cabinets.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heatsinks to radiate away the heat. For high-wattage amplifiers (over 800 watts), a fan is often used to move air across internal heatsinks.<ref>[http://www.yorkville.com/default.asp?p1=6&p2=17&p_id=25 Power Amplifiers - General Information: Yorkville Sound]</ref>
{{commons|Guitar}}
==See also==
*[[Amplifier]]
* [[Bass effects]]
* [[Guitar effects]]
* [[Guitar amplifier]]
* [[Distortion (guitar)]]
* [[Guitar speaker]]
* [[Isolation cabinet (guitar)]]
* [[Guitar speaker cabinet]]
*[[Valve sound]]
*[[Guitar amplifier]]
*[[Bass instrument amplification]]
*[[Distortion (guitar)]]
*[[Power attenuator (guitar)]]
*[[Electronic amplifier]]
*[[Guitar speaker]]
*[[Sound reinforcement system]]
==References==
<!-- ----------------------------------------------------------
See http://en.wikipedia.org/wiki/Wikipedia:Footnotes for a
discussion of different citation methods and how to generate
footnotes using the <ref>, </ref> and <reference /> tags
----------------------------------------------------------- -->
<div class="references-small">
<references />
</div>
{{citations missing|date=July 2007}}
== External links ==
* [http://www.duncanamps.com/index.htm Duncan's amp pages] - all sorts of information, especially, but not only, on valve guitar amplifiers
* [http://www.amptone.com/booksamps.htm List of books about guitar amplifiers and guitar amplifier tone]
*[http://tons-of-tone.tripod.com/index.html Tons of Tones !! : Technical site for Guitar Amplifier Modelling on Digital Multi-effect units]
[[Category:Instrument amplifiers|*]]
[[Category:Amplified instruments]]
[[Category:Electronic amplifiers]]
[[Category:Music hardware]]
[[Category:Sound production technology]]
[[de:Gitarrenverstärker]]
[[it:Amplificatore acustico]]
[[nl:Gitaarversterker]]
[[nl:Basversterker]]
[[ja:アンプ (楽器用)]]