Lipid bilayer
158011
225405318
2008-07-13T14:40:27Z
Heron
2954
/* Structure and function */ typo
[[Image:Lipid bilayer section.gif|right|thumb|300px|This fluid lipid bilayer cross section is made up entirely of [[phosphatidylcholine]].]]
A ''' lipid bilayer''' or '''bilayer lipid membrane''' ('''BLM''') is a membrane composed of [[lipid]] molecules (usually [[phospholipid]]s). The lipid bilayer is a critical component of all [[biological membrane]]s, including [[cell membrane]]s, and so is absolutely essential for all known life on Earth. Its essential structure was discovered in 1925 by two Dutch physicians, E.Gorter and F.Grendel, while they were comparing the surface area of human [[erythrocytes]] with that of the isolated lipids in a [[Langmuir-Blodgett trough]]. They found that the area of lipids from a known number of erythrocytes, when spread out on the trough, was just twice the calculated surface area of the erythrocytes. They concluded, correctly, that the membrane is two lipid molecules thick and proposed it is made of a bilayer.
== Structure and function ==
[[Image:Phospholipids aqueous solution structures.svg|thumb|200px|right|Cross section view of the structures that can be formed by phospholipids in aqueous solutions]]
The structure of a bilayer explains its function as a barrier. [[Lipid]]s are [[amphiphilic|amphiphilic molecules]] since they consist of [[Chemical polarity|polar]] head groups and [[Chemical polarity|non-polar]] [[fatty acid]] tails. The bilayer is composed of two layers of lipids arranged so that their [[hydrocarbon]] tails face one another to form an oily core held together by the [[hydrophobic effect]], while their charged heads face the aqueous solutions on either side of the membrane. The hydrophilic interfacial regions are saturated with water, while the lipophilic core region contains essentially no water. Because of the oily core of the bilayer, it is only permeable to small [[hydrophobic]] solutes (such as chloroform or ethanol), but has a very low permeability to polar inorganic [[compound]]s and [[ion]]ic molecules. For a cell, this means that even small molecules, such as sugars and salts, are contained inside it.
Support for the existence of a lipid bilayer in cell membranes came with the discovery by Alec Bangham in 1965 that [[phospholipids]], when introduced into an aqueous environment, spontaneously form [[liposomes]]. These are small balloons of lipid bilayer which can entrap polar molecules inside them. The major force driving the formation of lipid bilayers is the hydrophobic interaction between the tails and their repulsion by water. Within the interior of the membrane the hydrocarbon tails are arranged, on average, perpendicular to the plane of the membrane. The properties of the bilayer are influenced by a variety of factors, including the lipid composition, temperature and membrane pressure. The most important features are the nature of the lipid head groups and the length and degree of saturation of the hydrocarbon chains. For example, introduction of a cis-double bond into the carbon chain produces a kink which is difficult to pack with straight neighbors. This in turn leads to a more fluid hydrocarbon milieu: the more kinks there are, the greater the disorder and the more fluid the oily core becomes.
The interfacial regions of model [[phospholipid]] bilayers have a thickness of 8 to 10 Å, although they can be wider in [[biological membrane]]s that include lipid molecules whose head groups have complex carbohydrates, found in the [[ganglioside]]s or [[lipopolysaccharide]]s <ref name="McInosh">
McIntosh T.J, Vidal A., and Simon S.A. 2002. The energetics of peptide-lipid interactions: modification by interfacial dipoles and cholesterol. In ''Current Topics in Membranes'' 52: 205-253. </ref>. The thickness of the hydrocarbon core region is about 27 Å for the model bilayer formed by [[Phosphatidylcholine|DOPC]] [[lipid]] whose acyl chains have eighteen carbon atoms and a single double bond (di(C18:1)PC) <ref name="Lee1"> Lee, A.G. 2003 Lipid-protein interactions in biological membranes: a structural perspective. Biochim. Biophys. Acta 1612: 1-40. </ref>. This is close to the hydrophobic thickness of typical [[biological membranes]] measured by [[small angle X-ray scattering]] (27-32 Å)
<ref name="Mitra">
Mitra, K., Ubarretxena-Belandia, Tim O'conner., Taguchi, T., Warren, G., and
Engelman, D.M. 2004. Modulation of the bilayer thickness of exocytic
pathway membranes by membrane proteins rather than cholesterol. Proc.
Natl. Acad. Sci. 101: 4083–4088.</ref>. The thickness of a lipid bilayer increases by 0.8 Å per each additional carbon atom of the lipid tail in the [[liquid crystal]]line state, or by 1.1 Å in the gel state (these numbers should be multiplied by 2 because the bilayer has two leaflets). <ref name="Lewis"> Lewis, B.A. and Engelman, D.M. 1983a. Lipid bilayer thickness varies linearly with acyl chain length in fluid phosphatidylcholine vesicles. J. Mol. Biol. 166: 211–217. </ref> <ref name="Dumas"> Dumas, F., Lebrun, M.C., and Tocanne, J.F. 1999. Is the protein/lipid hydrophobic matching principle relevant to membrane organization and functions? FEBS Lett. 458: 271–277.</ref>. In addition, the presence of the flat [[cholesterol]] molecule in the membrane tends to straighten out the hydrocarbon chains, causing two main effects: the membrane becomes even less permeable to small molecules and the thickness of the hydrocarbon region is increased.
The boundary between the hydrocarbon core region and the water-saturated interface is very narrow (~3Å) and defined by the effective concentration of water <ref name="Marsh1"> Marsh, D. 2001. Polarity and permeation profiles in lipid membranes. Proc. Natl. Acad. Sci. 98: 7777–7782. </ref> that changes exponentially from nearly zero to ~2M <ref name="Marsh2"> Marsh, D. 2002. Membrane water-penetration profiles from spin labels. Eur. Biophys. J. 31: 559–562.</ref>. The hydrocarbon boundary plane passes through the carbonyl groups of [[phospholipid]]s. The phosphate groups of [[phospholipid]]s are completely hydrated and situated ~5 Å outside the hydrophobic membrane boundaries. <ref name="Nagle"> Nagle, J.F. and Tristram-Nagle, S. 2000. Structure of lipid bilayers. Biochim. Biophys. Acta 1469: 159–195. </ref>
Lipid bilayers have certain [[Elastic modulus|elastic properties]]. Free bilayers have zero [[surface tension]] and do not support [[shear stress]], like [[liquid]]s. However, they have non-zero [[Young's modulus]] and [[bulk modulus]]. They also can be described as having an internal lateral pressure or "the spontaneous radius of curvature", which defines the tendency of the lipid molecules to form curved rather than planar surfaces. <ref name="McIntosh"> McIntosh T.J. and Simon S.A. 2006. Roles of bilayer material properties in function and distribution of membrane proteins. Annu. Rev. Biophys. Biomol. Struct. 35: 177-198. </ref>
== Bilayers in cell membranes and lipid asymmetry ==
[[Image:Cell membrane detailed diagram.svg|thumb|right|400px|Eukaryotic cell membrane]]
The membranes in cells are more complicated because they contain a variety of different classes of lipids, although the vast majority of the lipids are phospholipids and, in the case of higher cells, [[cholesterol]]. The main phospholipids are [[phosphatidylcholine]], [[phosphatidylethanolamine]], [[phosphatidylserine]], [[phosphatidylinositol]] and [[sphingomyelin]]. [[Glycolipids]] usually account for a few percent of the lipid molecules.
In mammalian cells, the phospholipids are not uniformly distributed between the two monolayers. As discovered in the human erythrocyte by [[Mark Bretscher|M. Bretscher]] in 1972, the outer monolayer is largely composed of phosphatidyl-choline and [[sphingomyelin]] whereas the cytoplasmic monolayer contains the phosphatidyl-ethanolamine, phosphatidyl-serine and phosphatidyl-inositol. In addition, glycolipids are always found in the outer, non-cytoplasmic side. These asymmetries give the cell's bilayer properties different from those found in a liposome. For example, the negatively charged phospholipids, phosphatidyl-serine and phosphatidyl-inositol are found solely on the cytoplasmic side: this imparts a strong charge gradient across the bilayer which must affect the properties of transmembrane proteins and enzymes (note that membrane-spanning proteins are erroneously referred to as globular proteins in the opposite figure). The existence of lipid asymmetry in membranes depends on the very slow rate at which individual phospholipids can “flip-flop” — spontaneously move from one monolayer to the other — as first documented by [[Roger Kornberg|R. Kornberg]] and [[Harden M. McConnell|H. McConnell]] in 1971. By contrast, the uncharged cholesterol readily flip-flops between monolayers and is approximately equally distributed on each side of the bilayer.
The asymmetry of phospholipids reflects their biosynthetic pathway. The four phosphatidyl-containing lipids are all synthesised on the cytoplasmic side of the [[endoplasmic reticulum]], an internal membrane. The phosphatidylcholine, but not the other phospholipids, is then transported to the lumenal, non-cytoplasmic side, of that membrane by a [[flippase]]; this generates an asymmetry. Sphingomyelin is synthesised on, and incorporated into, the non-cytoplasmic side of the bilayer in the [[Golgi apparatus]].
The asymmetry of the lipid bilayer has important biological functions. Thus, phosphatidylinositol and its phosphorylated derivatives are key signalling molecules inside the cell. Phosphatidylserine is used to indicate to scavenging macrophages that a dying cell should be removed: during [[apoptosis]] a phosphatidyl-serine specific [[flippase]] or [[scramblase]] is activated, revealing this lipid on the surface of the dying cell. This is recognised by macrophages which consume the corpse.
Bacteria also appear to have asymmetric bilayers, although the evidence is less clear-cut. The main lipids in many bacteria are [[phosphatidylethanolamine]], [[phosphatidylglycerol]] and [[cardiolipin]]. In [[Bacillus megaterium]], there appears to be about twice as much phosphatidylethanolamine in the cytoplasmic monolayer as in the outer one. This implies that much of the phosphatidylglycerol and cardiolipin may be in the outer monolayer.
== Model lipid bilayers ==
[[Image:Supported Lipid Bilayer and Nanoparticles AFM.png|right|thumb|250px|Formation of transmembrane pores (holes) in supported lipid bilayer around nanoparticles of 1.2 to 22 nm diameter and coverage of the features of all other curvatures. Figures are adapted from the series of tapping mode [[Atomic force microscope|atomic force microscopy]] images recorded under liquid buffer medium.<ref name=Lipid_and_nanoparticles/>.]]
Within a critical concentration range, certain lipids will [[self-organization|self-organize]] in water to form a [[bilayer]]. Such membranes can be used in research, for example electrical experiments on the bilayer by using the [[patch clamp]] technique.
* Black BLM: a BLM over an aperture between two aqueous solutions. The advantage of this method is the ability to control the constituents of each side of the membrane. The disadvantage of this method is that it causes the membrane to be fairly unstable, and rupture is certain in a matter of hours.
* Supported BLM (s-BLM): a BLM covering a substrate surface (e.g. with patterned electrode). This method has the advantage of producing a stable membrane, which in some cases may last several days before rupturing. For example, preparation of supported lipid bilayer allowed to determine the formation of transmembrane pores (holes) around nanoparticles of approximately 1 to 20 nm in diameter.<ref name=Lipid_and_nanoparticles>Y. Roiter, M. Ornatska, A. R. Rammohan, J. Balakrishnan, D. R. Heine, and S. Minko, [http://dx.doi.org/10.1021/nl080080l Interaction of Nanoparticles with Lipid Membrane], Nano Letters, vol. 8, iss. 3, pp. 941-944 (2008).</ref> The drawback of s-BLM method is that it is only possible to control the solution on the side of the membrane that is not in contact with the electrode, although studies show that a 1 nanometre-thick water layer forms between the membrane and the substrate, this is of insufficient volume for controlling the solution composition.
* Polymer-cushioned BLM: This technique is combination of the black-BLM and supported-BLM approaches. Electrodes are patterned over a surface and a polymer (typically a cellulose hydrogel) is coated on top of the electrodes. This polymer stabilises the membrane and acts as a spacer from the solid substrate complex.
== Other lipid structures ==
<blockquote>''See also [[Lipid polymorphism]]''</blockquote>
Lipids can assume [[self-organization|self-organized]] structures other than bilayers, depending on their concentration, chemical structure, and experimental conditions: [[micelle]]s, [[monolayer]]s, or different lipid mesophases.
==References==
{{reflist}}
==External links==
* [http://blanco.biomol.uci.edu/Bilayer_Struc.html Structure of Fluid Lipid Bilayers], from the Stephen White laboratory at [[University of California, Irvine]]
== See also ==
* [[Biological membrane]]
* [[Vesicle (biology)|Vesicle]]s
* [[Liposomes]]
* [[Elasticity of cell membranes]]
* [[Extracellular matrix]]
* [[Phospholipid]]
* [[:Category: surfactants]]
* [[Protobiont]]
{{Membrane lipids}}
[[Category:Biological matter]]
[[Category:Membrane biology]]
[[cs:Lipidová dvouvrstva]]
[[de:Doppellipidschicht]]
[[es:Bicapa lipídica]]
[[fr:Bicouche lipidique]]
[[he:דו-שכבה ליפידית]]
[[ja:脂質二重層]]
[[pl:Dwuwarstwa lipidowa]]
[[sl:Lipidna dvojna plast]]
[[vi:Lớp lipid kép]]