Liquid chromatography-mass spectrometry 2378378 215928202 2008-05-30T09:24:02Z Firsfron 158443 clean up, Replaced: due to the fact that → because using [[Project:AutoWikiBrowser|AWB]] {{Infobox chemical analysis | name = Liquid chromatography-mass spectrometry | image = Ltq lcms.jpg | caption =Ion trap LCMS system | acronym = LCMS | classification =[[Chromatography]]<br>[[Mass spectrometry]] | analytes = [[organic molecule]]s<br>[[biomolecule]]s | manufacturers = [[Agilent]] <br /> [[Bruker]] <br /> [[MDS Inc.|MDS]] <br /> [[Shimadzu Scientific]] <br /> [[Thermo Fisher Scientific]] <br /> [[Varian, Inc.]] <br /> [[Waters Corporation]] | related = [[Gas chromatography-mass spectrometry]] | hyphenated = }} '''Liquid chromatography-mass spectrometry''' ('''LC-MS''') is an [[analytical chemistry]] technique that combines the physical separation capabilities of [[HPLC|liquid chromatography]] (aka HPLC) with the mass analysis capabilities of [[mass spectrometry]]. LC-MS is a powerful technique used for many applications which has very high sensitivity and specificity. Generally its application is oriented towards the specific detection and potential identification of chemicals in the presence of other chemicals (in a complex mixture). ==Liquid chromatography== ===Scale=== A major difference between traditional [[HPLC]] and the [[chromatography]] used in LC-MS is that in the latter case the scale is usually much smaller, both with respect to the internal diameter of the column and even more so with respect to flow rate since it scales as the square of the diameter. For a long time, 1 mm columns were typical for LC-MS work (as opposed to 4.6 mm for HPLC). More recently 300<math>\mu</math>m and even 75<math>\mu</math>m capillary columns have become more prevalent. At the low end of these column diameters the flow rates approach 100nL/min and are generally used with [[nanospray]] sources.<ref>[http://dx.doi.org/10.1002/mas.1280130504 Capillary liquid chromatography/mass spectrometry, Kenneth B. Tomer, M. Arthur Moseley, Leesa J. Deterding, Carol E. Parker, Mass Spectrometry Reviews, Vol 13, 1994, pp 431-457]</ref> ===Flow splitting=== When standard [[bore]] (4.6 mm) columns are used the flow is often split ~10:1. This can be beneficial by allowing the use of other techniques in tandem such as MS and UV. However splitting the flow to UV will decrease the sensitivity of spectrophotometric detectors. The Mass Spec on the other hand will give improved sensitivity at flow rates of 200 μL/min or less. This is because the analyte ions have to be vaporised (nebulized) in order to become charged. ==Mass spectrometry== ===Mass analyzer=== There are a lot of mass analyzers that can be used in LC/MS. Single Quadrupole, Triple Quadrupole, Ion Trap, TOF (time of Flight) and Quadrupole-time of flight (Q-TOF). ===Interface=== Understandably the interface between a liquid phase technique which continuously flows liquid, and a gas phase technique carried out in a vacuum was difficult for a long time. The advent of [[electrospray ionization]] changed this. The interface is most often an [[electrospray]] ion source or variant such as a nanospray source; however [[fast atom bombardment]], [[thermospray]] and [[atmospheric pressure chemical ionization]] interfaces are also used.<ref>[http://dx.doi.org/10.1002/mas.1280110103 Combined liquid chromatography mass spectrometry. Part III. Applications of thermospray, Patrick Arpino, Mass Spectrometry Reviews, Vol 11, 1992 pp 3-40]</ref> Various deposition and drying techniques have also been used such as using moving belts; however the most common of these is off-line [[MALDI]] deposition.<ref>Combined liquid chromatography mass spectrometry. Part I. Coupling by means of a moving belt interface, Patrick Arpino, Mass Spectrometry Reviews, Vol 8, 1989 pp 35-55</ref><ref>[http://www3.interscience.wiley.com/cgi-bin/abstract/10009479/ABSTRACT Coupling matrix-assisted laser desorption/ionization to liquid separations, Kermit K. Murray, Mass Spectrometry Reviews, Vol 16, pp 283-299]</ref> ==Applications== ===Pharmacokinetics=== LC-MS is very commonly used in [[pharmacokinetic]] studies of pharmaceuticals. These studies tell us how quickly a drug will be cleared from the Hepatic Blood flow, and organs of the body. MS is used for this due to high sensitivity and exceptional specificity compared to UV (as long as the analyte can be suitably ionised), and quick analysis time. The major advantage MS has is the use of Tandem MS-MS. You can program the detector to select out certain ions to fragment. The process is more complex than just a selection technique, but this is essentially what it does. This results in a response that is due to a chosen fragment of a molecule chosen by the operator and as long as there are no interferences or ion suppression the time taken during the LC separation can be quite quick. It is common now to have analysis times of 1 minute or less by MS-MS detection, compared to over 10 mins with UV detection.<ref>Increasing Speed and Throughput When Using HPLC-MS/MS Systems for Drug Metabolism and Pharmacokinetic Screening, Y. Hsieh and W.A. Korfmacher, Current Drug Metabolism Volume 7, Number 5, 2006, Pp. 479-489</ref><ref>Covey TR, Lee ED, Henion JD. 1986. High-speed liquid chromatography/tandem mass spectrometry for the determination of drugs in biological samples. Anal Chem 58:2453-2460.</ref><ref>Thermospray liquid chromatography/mass spectrometry determination of drugs and their metabolites in biological fluids. Covey TR et al. Anal Chem. 1985 Feb;57(2):474-81</ref> ===Proteomics=== LC-MS is also used in the study of [[proteomics]] where again components of a complex mixture must be detected and identified in some manner. The [[bottom-up proteomics]] LC-MS approach to proteomics generally involves protease digestion (usually [[Trypsin]]) followed by LC-MS with [[peptide mass fingerprinting]] or LC-MS/MS (tandem MS) to derive sequence of individual peptides. ===Drug development=== LC-MS is frequently used in drug development at many different stages including Peptide Mapping, Glycoprotein Mapping, Natural Products Dereplication, Bioaffinity Screening, In Vivo Drug Screening, Metabolic Stability Screening, Metabolite Identification, Impurity Identification, Degradant Identification, Quantitative Bioanalysis, and Quality Control.<ref>[http://www3.interscience.wiley.com/cgi-bin/abstract/66004558/ABSTRACT LC/MS applications in drug development, Mass Spectrometry Reviews, Mike S. Lee, Edward H. Kerns, Vol 18, 1999, pp 187-279]</ref> ==References== {{reflist}} ==Bibliography== {{refbegin}} *{{cite book |author=Thurman, E. M.; Ferrer, Imma |title=Liquid chromatography/mass spectrometry, MS/MS and time of flight MS: analysis of emerging contaminants |publisher=American Chemical Society |location=Columbus, OH |year=2003 |pages= |isbn=0-8412-3825-1 |oclc= |doi=}} *{{cite book |author=Ardrey, R. E.; Ardrey, Robert |title=Liquid chromatography-mass spectrometry: an introduction |publisher=J. Wiley |location=London |year=2003 |pages= |isbn=0-471-49801-7 |oclc= |doi=}} *{{cite book |author=McMaster, Marvin C. |title=LC/MS: a practical user's guide |publisher=John Wiley |location=New York |year=2005 |pages= |isbn=0-471-65531-7 |oclc= |doi=}} *{{cite book |author=Wilfried M.A. Niessen, Wilfried M. Niessen |title=Liquid Chromatography-Mass Spectrometry, Third Edition (Chromatographic Science) |publisher=CRC |location=Boca Raton |year= 2006 |pages= |isbn=0-8247-4082-3 |oclc= |doi=}} *{{cite book |author=Yergey, Alfred L. |title=Liquid chromatography/mass spectrometry: techniques and applications |publisher=Plenum Press |location=New York |year=1990 |pages= |isbn=0-306-43186-6 |oclc= |doi=}} {{refend}} {{Mass spectrometry}} [[Category:chromatography]] [[Category:mass spectrometry]] [[Category:Proteomics]] [[de:Flüssigchromatographie mit Massenspektrometrie-Kopplung]]