Milled coinage 221516 201325847 2008-03-27T14:25:13Z Rosser1954 1382292 a gallery added {{Numismatics}} In [[numismatics]], the term '''milled coinage''' (also known as '''machine-struck coinage''') is used to describe coins which are produced by some form of machine, rather than by manually hammering coin blanks between two dies ([[hammered coinage]]) or casting coins from dies. The earliest machine known for producing coins is the ''screw press'', invented by [[Leonardo da Vinci]] in the 15th century, powered by a [[water mill]]. With the arrival of machine-driven and struck coins also came new technology and techniques for stamping the coin's edge with a reeded or milled edge or impressed with designs. The presence of reeding shows that the coin's edge has not been shaved or clipped. The British numismatic term for the reeded ridged edge is graining and the reeds are called crenellations. The new edging processes for coins impeded them from being [[Coin clipping|clipped]] into smaller pieces as did happen when coins were hammer-struck. Hence, milled edges were originally designed and intended to show that none of the metal had been shaved off the coin. Earlier, coins were shaved or clipped to almost half of their minted weight by unscrupulous persons and it is from this phenomenon that we derive the phrase "clip artist" to mean a thief. This form of debasement in Tudor England led to the formulation of [[Gresham's Law]], so named after Sir [[Thomas Gresham]]. The earliest milled coins produced in [[England]] date from the early 1560s, but milled coinage did not entirely replace hammered coinage until 1662. == Gallery == <gallery> Image:Milling of coins.jpg|<Center>A mill for the production of 'milled' coins with both coin dyes illustrated. Image:Coin edge enscription mill.jpg|<Center>A mill for inscribing or milling the edges of coin flans or planchets. </gallery> ==See also== *[[Aubin Olivier]] [[Category:Numismatics]] [[Category:Currency production methods]] [[it:Monetazione meccanica]]