Optical microscope
117534
224262117
2008-07-08T01:32:49Z
Sentausa
300908
interwiki +id, edit unnecessary headline
[[Image:Microscope Zeiss 1879.jpg|thumb|right|175px|An [[1879]] Carl Zeiss Jena [[Optical microscope]].]]
The '''optical microscope''', often referred to as the "light microscope", is a type of [[microscope]] which uses [[visible light]] and a system of [[lens (optics)|lenses]] to magnify images of small samples. Optical microscopes are the oldest and simplest of the microscopes.
There are non-optical microscopes, which require chemical or ion staining of non-living samples, and can magnify exponentially greater than the optical microscope. See: [[scanning electron microscope]], [[transmission electron microscope]].
==Optical configurations==
[[Image:Old light microscope.jpg|thumb|right|Old light microscope]]
There are two basic configurations of optical microscope in use, the simple (one lens) and compound (many lenses).
light microscope
A ''simple microscope'' is a microscope that uses only one lens for magnification, and is the original light microscope. [[Anton van Leeuwenhoek|Van Leeuwenhoek]]'s microscopes consisted of a small, single [[Lens (optics)#Types of lenses|convex lens]] mounted on a brass plate, with a screw mechanism to hold the sample or specimen to be examined. [http://www.brianjford.com/wavrbcs.htm Demonstrations] by British microscopist have produced surprisingly detailed images from such basic instruments.
Though now considered primitive, the use of a single, convex lens for viewing is still found in simple magnification devices, such as the [[magnifying glass]], and the [[loupe]].
Light microscope are able to view specimens in [[colour]], an important advantage when compared with electron microscopes, especially for [[forensic analysis]].
== History of the microscope ==
{{seealso|timeline of microscope technology}}
[[Image:Compound microscope john cuff 1750.jpg|thumb|right|Compound microscope made by John Cuff in 1750]]
[[Image:Stelluti bees1630.jpg|thumb|left|The oldest published image known to have been made with a microscope: bees by [[Francesco Stelluti]], 1630<ref>"''The Lying stones of Marrakech''", by Stephen Jay Gould, 2000</ref>]]
It is difficult to say who invented the compound microscope. [[Dutch people|Dutch]] spectacle-makers Hans Janssen and his son [[Zacharias Janssen]] are often said to have invented the first compound microscope in [[1590]], but this was a declaration made by Zacharias Janssen himself during the mid [[1600]]s. The date is unlikely, as it has been shown that Zacharias Janssen actually was born around 1590. Another favourite for the title of 'inventor of the microscope' was [[Galileo Galilei]]. He developed an ''occhiolino'' or compound microscope with a convex and a concave lens in [[1609]]. Galileo's microscope was celebrated in the [[Accademia dei Lincei]] in 1624 and was the first such device to be given the name "microscope" a year latter by fellow Lincean [[Giovanni Faber]]. Faber coined the name from the [[Greek language|Greek]] words ''μικρόν'' (micron) meaning "small", and ''σκοπεῖν'' (skopein) meaning "to look at", a name meant to be analogus with "[[telescope]]", another word coined by the Linceans<ref>[http://brunelleschi.imss.fi.it/esplora/microscopio/dswmedia/risorse/testi_completi.pdf brunelleschi.imss.fi.it "Il microscopio di Galileo"]</ref>.
[[Christiaan Huygens]], another Dutchman, developed a simple 2-lens ocular system in the late 1600s that was [[Achromatic lens|achromatically]] corrected, and therefore a huge step forward in microscope development. The Huygens ocular is still being produced to this day, but suffers from a small field size, and other minor problems.
[[Anton van Leeuwenhoek]] (1632-1723) is generally credited with bringing the microscope to the attention of biologists, even though simple magnifying lenses were already being produced in the 1500s. Van Leeuwenhoek's home-made microscopes were very small simple instruments, with a single, yet strong lens. They were awkward in use, but enabled van Leeuwenhoek to see detailed images. It took about 150 years of optical development before the compound microscope was able to provide the same quality image as van Leeuwenhoek's simple microscopes, due to timely difficulties of configuring multiple lenses. Still, despite widespread claims, van Leeuwenhoek is not the inventor of the microscope.
==The components of the microscope==
[[Image:Optical microscope nikon alphaphot.jpg|right|180px|thumb|Basic optical microscope elements(1990's)]]
[[Image:Mikroskop.png|thumb|right|Basic optical microscope elements(1900's):<br><br>
1. ocular lens, or eyepiece<br>
2. objective turret<br>
3. [[objective lens]]es<br>
4. coarse adjustment knob<br>
5. fine adjustment knob<br>
6. object holder or stage<br>
7. [[mirror]]<br>
8. diaphragm and [[Condenser (microscope)|condenser]]]]
All optical microscopes share the same basic components:
*The [[eyepiece]] - a cylinder containing two or more lenses to bring the image to focus for the eye. The eyepiece is inserted into the top end of the body tube. Eyepieces are interchangeable and many different eyepieces can be inserted with different degrees of magnification. Typical magnification values for eyepieces include 5x, 10x and 2x. In some high performance microscopes, the optical configuration of the objective lens and eyepiece are matched to give the best possible optical performance. This occurs most commonly with [[apochromat]]ic objectives.
*The objective lens - a cylinder containing one or more lenses to collect light from the sample. At the lower end of the microscope tube one or more objective lenses are screwed into a circular nose piece which may be rotated to select the required objective lens. Typical magnification values of objective lenses are 4x, 5x, 10x, 20x, 40x, 80x and 100x. Some high performance objective lenses may require matched eyepieces to deliver the best optical performance.
*The stage - a platform below the objective which supports the specimen being viewed. In the center of the stage is a circular hole through which light passes to illuminate the specimen. The stage usually has arms to hold [[Microscope slide|''slides'']] (rectangular glass plates with typical dimensions of 25 mm by 75 mm, on which the specimen is mounted).
*The illumination source - below the stage, light is provided and controlled in a variety of ways. At its simplest, daylight is directed via a [[mirror]]. Most microscopes, however, have their own controllable light source that is focused through an optical device called a [[Condenser (microscope)|condenser]], with [[diaphragm (optics)|diaphragm]]s and filters available to manage the quality and intensity of the light.
The whole of the optical assembly is attached to a rigid arm which in turn is attached to a robust U shaped foot to provide the necessary rigidity. The arm is usually able to pivot on its joint with the foot to allow the viewing angle to be adjusted. Mounted on the arm are controls for focusing, typically a large knurled wheel to adjust coarse focus, together with a smaller knurled wheel to control fine focus.
Updated microscopes may have many more features, including transmission illumination, [[phase contrast microscopy]] and [[differential interference contrast microscopy]], and digital cameras.
On a standard compound optical microscope, there are three objective lenses: a scanning lens (4×), low power lens (10×)and high power lens (40×). Advanced microscopes often have a fourth objective lens, called an [[oil immersion objective|oil immersion lens]]. To use this lens, a drop of immersion oil is placed on top of the cover slip, and the lens is very carefully lowered until the front objective element is immersed in the oil film. Such immersion lenses are designed so that the refractive index of the oil and of the cover slip are closely matched so that the light is transmitted from the specimen to the outer face of the objective lens with minimal refraction. An oil immersion lens usually has a power of 100×.
The actual power or [[magnification]] of an optical microscope is the product of the powers of the ocular ([[eyepiece]]), usually about 10×, and the objective lens being used.
Compound optical microscopes can produce a magnified image of a specimen up to 1000× and, at high magnifications, are used to study thin specimens as they have a very limited [[depth of field]].
== How a microscope works ==
[[Image:Microscope-optical path.svg|right|thumb|400px|Optical path in a typical microscope]]
The optical components of a modern microscope are very complex and for a microscope to work well, the whole optical path has to be very accurately set up and controlled. Despite this, the basic optical principles of a microscope are quite simple.
The objective lens is, at its simplest, a very high powered magnifying glass ''i.e.'' a lens with a very short focal length. This is brought very close to the specimen being examined so that the light from the specimen comes to a focus about 160 mm inside the microscope tube. This creates an enlarged image of the subject. This image is inverted and can be seen by removing the eyepiece and placing a piece of tracing paper over the end of the tube. By carefully focusing a brightly lit specimen, a highly enlarged image can be seen. It is this [[real image]] that is viewed by the eyepiece lens that provides further enlargement.
In most microscopes, the eyepiece is a compound lens, with one component lens near the front and one near the back of the eyepiece tube. This forms an air-separated couplet.
In many designs, the [[virtual image]] comes to a focus between the two lenses of the eyepiece, the first lens bringing the real image to a focus and the second lens enabling the eye to focus on the virtual image.
In all microscopes the image is viewed with the eyes focused at infinity (mind that the position of the eye in the [[:media:Microscope diag.svg|above figure]] is determined by the eye's focus). Headaches and tired eyes after using a microscope are usually signs that the eye is being forced to focus at a close distance rather than at infinity.
==Stereo microscope==
{{see also|Comparison Microscope}}
[[Image:Optical stereo microscope nikon smz10.jpg|thumb|left|Stereo microscope]]
The '''stereo''' or '''dissecting microscope''' is designed differently from the diagrams above, and serves a different purpose. It uses two separate optical paths with two objectives and two eyepieces to provide slightly different viewing angles to the left and right eyes. In this way it produces a [[stereoscopy|three-dimensional]] visualization of the sample being examined.<ref name=nikonstereo1>[http://www.microscopyu.com/articles/stereomicroscopy/stereointro.html "Introduction to Stereomicroscopy"] by Paul E. Nothnagle, William Chambers, and Michael W. Davidson, ''[[Nikon]] MicroscopyU''.</ref>
The stereo microscope is often used to study the surfaces of solid specimens or to carry out close work such as sorting, dissection, [[microsurgery]], watch-making, small circuit board manufacture or inspection, and the like.
Unlike compound microscopes, illumination in a stereo microscope most often uses [[reflected light|reflected]] (episcopic) illumination rather than [[transmitted light|transmitted]] (diascopic) illumination, that is, light reflected from the surface of an object rather than light transmitted through an object. Use of reflected light from the object allows examination of specimens that would be too thick or otherwise opaque for compound microscopy. However, stereo microscopes are also capable of transmitted light illumination as well, typically by having a bulb or mirror beneath a transparent stage underneath the object, though unlike a compound microscope, transmitted illumination is not focused through a condenser in most systems.<ref name=nikonstereo2>[http://www.microscopyu.com/articles/stereomicroscopy/stereoreflected.html "Illumination for Stereomicroscopy: Reflected (Episcopic) Light"] by Paul E. Nothnagle, William Chambers, Thomas J. Fellers, and Michael W. Davidson , ''Nikon MicroscopyU''.</ref> Stereoscopes with specially-equipped illuminators can be used for [[dark field microscopy]], using either reflected or transmitted light.<ref name=nikonstereo3>[http://www.microscopyu.com/articles/stereomicroscopy/stereoreflected.html "Illumination for Stereomicroscopy: Darkfield Illumination"] by William Chambers, Thomas J. Fellers, and Michael W. Davidson , ''Nikon MicroscopyU''.</ref>
[[Image:manusingmicroscope.jpg|right|thumb|Scientist using a stereo microscope outfitted with a digital imaging pick-up]]
Great working distance and depth of field here are important qualities for this type of microscope. Both qualities are inversely correlated with resolution: the higher the resolution (''i.e.'' the shorter the distance at which two adjacent points can be distinguished as separate), the smaller the depth of field and working distance. A stereo microscope has a useful magnification up to 100×. The resolution is maximally in the order of an average 10× objective in a compound microscope, and often much lower.
There are two types of magnification systems in stereo microscopes. One is fixed magnification in which primary magnification is achieved by a paired set of [[objective lenses]] with a set degree of magnification. The other is zoom or pancratic magnification, which are capable of a continuously variable degree of magnification across a set range. Zoom systems can achieve further magnification through the use of auxiliary objectives that increase total magnification by a set factor. Also, total magnification in both fixed and zoom systems can be varied by changing eyepieces.<ref name=nikonstereo1/>
The stereo microscope should not be confused with a compound microscope equipped with binocular eyepieces. In such a microscope both eyes see the same image, but the binocular eyepieces provide greater viewing comfort. However, the image in such a microscope is no different from that obtained with a single monocular eyepiece.
===Digital display with stereo microscopes===
Recently various video dual CCD camera pickups have been fitted to stereo microscopes, allowing the images to be displayed on a high resolution LCD monitor. Software converts the two images to an integrated Anachrome 3D image, for viewing with plastic red/cyan glasses, or to the cross converged process for clear glasses and somewhat better color accuracy. The results are viewable by a group wearing the glasses. These files may recorded as well.
== Special designs ==
{{Main|Microscopy}}
Other types of optical microscope include:
* the [[inverted microscope]] for studying samples from below; useful for cell cultures in liquid;
* the [[student microscope]] designed for low cost, durability, and ease of use;
* the '''research microscope''' which is an expensive tool with many enhancements;
* the [[petrographic microscope]] whose design usually includes a polarizing filter, rotating stage and gypsum plate to facilitate the study of minerals or other crystalline materials whose optical properties can vary with orientation.
[[Image:Pocket microscope.jpg|300px|thumb|An old pocket microscope]]
* the '''polarizing microscope'''
* the [[fluorescence microscope]]
* the [[phase contrast microscope]]
== Limitations of light microscopes ==
At very high magnifications with transmitted light, point objects are seen as fuzzy discs surrounded by [[diffraction]] rings. These are called [[Airy disk]]s. The limit of resolution ('''Resolving power of a microscope''') is therefore taken as the ability to distinguish between two closely spaced Airy disks (or, in other words the ability of the microscope to reveal adjacent structural detail as distinct and separate). It is these impacts of diffraction that limit the ability to resolve fine details. The extent of and magnitude of the diffraction patterns are affected by both by the [[wavelength]] of [[light]] (<math>\lambda</math>), the refractive materials used to manufacture the objective lens and the [[numerical aperture]] (NA or <math>A_N</math>) of the objective lens. There is therefore a finite limit beyond which it is impossible to resolve separate points in the objective field. Assuming that optical aberrations in the whole optical set-up are negligible, the resolution ''d'', is given by:
:<math>d = \frac { \lambda } { 2 A_N }</math>
Usually, a <math>\lambda</math> of [[1 E-7 m|550 nm]] is assumed, corresponding to [[green]] light. With [[Earth's atmosphere|air]] as medium, the highest practical <math>A_N</math> is 0.95, and with oil, up to 1.5.
In practice the lowest value of ''d'' obtainable is around 0.2 [[micrometre]]s or 200 [[nanometer]]s.
[[Image:Microscope And Digital Camera.JPG|thumb|left|A modern microscope with a [[mercury bulb]] for [[fluorescence microscopy]]. The microscope has a [[digital camera]], and is attached to a [[computer]].]]
Other optical microscope designs (''e.g.'' [[STED microscope|Stimulated Emission Depletion Microscopy]]) can offer an improved resolution when observing '''self-luminous particles''', which is not covered by Abbe's diffraction limit for the compound microscope. Abbe's theory (by [[Ernst Karl Abbe]]) is based on the fact that a non-self-luminous particle is illuminated by an extraneous source. For Ernst Abbe's work in light microscopy, see the Molecular Expressions web site at http://micro.magnet.fsu.edu/optics/timeline/people/abbe.html.
==Alternatives to optical microscopy==
In order to overcome the limitations set by the diffraction limit of visible light other microscopes have been designed which use other waves.
*[[Transmission electron microscope]]
*[[Scanning electron microscope]]
*[[X-ray microscope]]
*[[Scanning Tunnelling Microscopy]] (STM)
*[[Atomic Force Microscope]] (AFM)
The use of electrons and x-rays in place of light allows much higher resolution - the wavelength of the radiation is shorter so the diffraction limit is lower. To make the
short-wavelength probe non-destructive, the atomic beam imaging system ([[atomic nanoscope]]) is proposed and widely discussed in the literature, but it is not yet competitive with conventional imaging systems.
STM and AFM are scanning probe techniques using a small probe which is scanned over the sample surface. Resolution in these cases is limited by the size of the probe; micromachining techniques can produce probes with tip radii of 5-10nm.
==See also==
* [[Köhler illumination]]
* [[Objective (optics)|Objective]]
* [[Microscope slide]]
==References==
{{reflist}}
* "Metallographic and Materialographic Specimen Preparation, Light Microscopy, Image Analysis and Hardness Testing", Kay Geels in collaboration with Struers A/S, ASTM International 2006.
==External links==
* [http://micro.magnet.fsu.edu ''Molecular Expressions'': ] [http://micro.magnet.fsu.edu/primer/anatomy/anatomy.html Concepts in Optical Microscopy]
* [http://www.doitpoms.ac.uk/tlplib/optical-microscopy/index.php Online tutorial of practical optical microscopy]
* [http://www.substech.com/dokuwiki/doku.php?id=metallurgical_microscope Metallurgical microscope (SubsTech - free and open knowledge source in Materials Engineering)]
* [http://www.antique-microscopes.com A collection of early microscopes]
* [http://www.musoptin.com/mikro1.html Historical microscopes], an illustrated collection with more than 3000 photos of scientific microscopes by European makers (text in German language)
* [http://www.surmedical.com/articulos/microscopios_en.php How to choose a microscope.]
* [http://www.surmedical.com/articulos/microscopios1_en.php Microscope glossary.]
* [http://www.struers.com/default.asp?top_id=5&main_id=43&sub_id=168&doc_id=326 Structure Magazine]
[[Category:Microscopy]]
http://www.microscopyu.com/articles/optics/opticshome.html
[[id:Mikroskop cahaya]]
[[ca:Microscopi òptic]]
[[de:Lichtmikroskop]]
[[es:Microscopio óptico]]
[[eo:Optika mikroskopo]]
[[fa:میکروسکوپ نوری]]
[[fr:Microscope optique]]
[[ms:Mikroskop optik]]
[[ja:光学顕微鏡]]
[[pl:Mikroskop optyczny]]
[[ru:Оптический микроскоп]]
[[simple:Light microscope]]
[[fi:Valomikroskooppi]]
[[uk:Оптичний мікроскоп]]
[[zh:光学显微镜]]