Oxygen mask
1297796
219567119
2008-06-15T21:29:38Z
Aitias
5947179
clean up, typos fixed: aginst → against using [[Project:AutoWikiBrowser|AWB]]
[[Image:N12453669 32127896 9556.jpg|right|thumb|A plastic oxygen mask on an [[Emergency department|ER]] patient.]]
An '''oxygen mask''' provides a method to transfer breathing [[oxygen]] gas from a storage tank to the [[lungs]]. Oxygen masks may cover the nose and mouth (oral nasal mask) or the entire face (full-face mask). They may be made of [[plastic]], [[silicone]], or [[rubber]].
==Medical plastic oxygen masks==
Plastic masks are used primarily by [[medical]] care providers for [[oxygen therapy]] because they are disposable and so reduce cleaning costs. As they are light in weight, they are more comfortable than some other masks, increasing patient acceptance. Transparent plastic masks also leave the face visible, allowing care providers to better ascertain patients’ conditions.
==Silicone and rubber masks==
[[Image:Oxymask.JPG|frame|right|220px|Breathing 100% oxygen from a tightly-fitting aviators’ oxygen mask]]
Silicone and rubber oxygen masks are heavier than plastic masks. They are designed to provide a good seal for long-duration use by [[aviator]]s, medical researcher subjects, and [[hyperbaric medicine|hyperbaric chamber]] and other patients that require administration of pure oxygen, such as [[carbon monoxide poisoning]] and [[decompression sickness]] victims. [[Valves]] inside these tight-fitting masks control the flow of gases into and out of the masks, so that rebreathing of exhaled gas is minimised, thus optimising oxygen delivery.
==Hoses and tubing and oxygen regulators==
Hoses or tubing connect an oxygen mask to the oxygen supply. Hose is larger in diameter then tubing and can allow greater oxygen flow. When hose is used it may have a ribbed or corrugated design to allow bending of the hose while preventing twisting and cutting off the oxygen flow. The quantity of oxygen delivered from the storage tank to the oxygen mask is controlled by a valve called a [[regulator]]. Some types of oxygen masks have a breathing bag made of plastic or rubber attached to the mask or oxygen supply hose to store a supply of oxygen to allow deep breathing without waste of oxygen with use of simple fixed flow regulators.
==Aviators’ masks==
[[Image:tightlysealedmask.jpg|right|thumb|190px|Aviators’ pressure-demand oxygen mask, showing sponge-rubber facial seal and inhalation valves. The exhalation valve is below the center of the mask.]]
Three main kinds of oxygen masks are used by [[aviators|pilots]] and crews who fly at high altitudes: continuous flow, diluter demand, and pressure demand.
A ''continuous-flow'' mask is usually equipped with a rebreather bag (recognizable from airline demonstrations) which recycles part of the exhaled air and saves oxygen. This type of mask is used by general-aviation aircraft flying above 12500 feet MSL (up to about 25000 MSL) and in the cabins of passenger craft.
''Diluter-demand'' and ''pressure-demand'' masks supply oxygen only when the user inhales. They each require a good seal between the mask and the user’s face.
In a diluter-demand system, as the altitude increases (ambient pressure, and therefore the partial pressure of ambient oxygen, decreases), the oxygen flow increases such that the partial pressure of oxygen is roughly constant. Diluter-demand oxygen systems can be used up to 34000 feet.
In a pressure-demand system, oxygen in the mask is above ambient pressure, permitting breathing above 34000 feet. Because the pressure inside the mask is greater than the pressure around the user’s torso, inhalation is easy, but exhalation requires more effort. Aviators are trained in pressure-demand breathing in [[altitude chamber]]s. Because they seal tightly, pressure-demand-type oxygen masks are also used in hyperbaric oxygen chambers and for oxygen breathing research projects with standard oxygen regulators.
Aviators' oxygen masks often contain a microphone for talking on the plane's two-way radio.
They are often part of a [[pressure suit]].
==Aviation passenger masks and emergency oxygen systems==
{{Main|Emergency oxygen system}}
[[Image:Passenger oxygen mask dsc06035.jpg|thumb|Emergency oxygen masks deployed]]
Most [[commercial aircraft]] are fitted with oxygen masks for use when cabin pressurisation fails. In general, commercial aircraft are [[cabin pressurization|pressurised]] so that the cabin air is at a pressure equivalent to about 8,000 feet altitude, where one can breathe normally without an oxygen mask. If the oxygen pressure in the cabin drops below a safe level, risking [[hypoxia (medical)|hypoxia]], compartments containing the oxygen masks will open automatically, either above or in front of the passenger and crew seats, and in the lavatories.
In the early years of commercial flight, before pressurized cabins were invented, airliner passengers sometimes had to wear oxygen masks during routine flights.
==Self-contained breathing apparatus (SCBA)==
[[Firefighter]]s and [[emergency service]] workers use full face masks that provide breathing air and eye and face protection. These masks are typically attached to a tank carried upon the back of the wearer and are called [[self-contained breathing apparatus]]es (SCBA). Because oxygen breathing is hazardous in areas where fires may be burning, SCBA units are normally filled with compressed breathing air rather than oxygen.
==Specialized masks for divers and astronauts==
Specialized full-face masks that supply oxygen or other [[breathing gases]] are used by [[underwater diving|divers]] and [[astronaut]]s to remove nitrogen from their blood before [[space walk]]s (EVA) or underwater decompression.
==Anaesthesia oxygen masks==
Face masks that are designed to provide [[general anaesthesia]] inhalation gas to operative patients are called anaesthesia masks. These masks are made of materials (anti static rubber or silicon) that are resistant to creating a spark or static electric discharge. The masks often use a Y fitting upon the mask and a double breathing hose system. One hose supplies breathing gas and oxygen from a anaesthesia machine , the other hose brings the exhaled gas back to the [[anaesthesia machine]]. These masks can be fitted with a exhalation valve and inhalation breathing bag to provide high oxygen inhalation levels for 100% oxygen breathing for carbon monoxide poisoning victims. They are fitted with 4 point head straps to provide a tight seal against the face.
==Masks for high-altitude climbers==
Oxygen masks are used by [[climbers]] of high peaks such as [[Mt. Everest]]. The tanks are made of light-weight, high-strength metals and are covered in high-strength fiber such as [[kevlar]]. The special bottles are filled with oxygen at very high pressure which provides a longer time duration of oxygen for breathing then standard pressure bottles. These systems are generally only used above 7000 meters.
==Mask retention systems==
Medical oxygen masks are held in place by medical personnel or the user by hand, or they may be fitted with a light weight elastic headband so the mask can be removed quickly. Full-face masks are secured by several straps. Tightly fitting oxygen masks are secured at four points by two straps. Aviators’ masks are often equipped with “quick don” harnesses that allow those in pressurized aircraft to rapidly don the masks in emergencies. Military aviators’ oxygen masks are secured to flight helmets with quick-release systems.
==See also==
* [[Mask]]
* [[Full face diving mask]]
* [[Nasal cannula]]
* [[Oxygen therapy]]
* [[Hyperbaric oxygen therapy]]
* [[Space suit]]
* [[Oxygen tent]]
==References==
{{Unreferenced|date=August 2007}}
[[Category:Medical equipment]]
[[Category:Masks]]
[[Category:Oxygen]]
[[de:Sauerstoffmaske]]