Resin acid
2657790
220605578
2008-06-20T17:50:50Z
Stone
13976
'''Resin acids''' are [[protectant]]s and [[wood]] preservatives that are produced by [[parenchyma]]tous [[epithelium|epithelial]] cells that surround the [[resin duct]]s in trees from [[temperate coniferous forests]]. The [[resin]] acids are formed when two- and three-carbon molecules couple with [[isoprene]] building units to form mono- (volatile), sesqui- (volatile), and [[terpene|diterpene]](nonvolatile) structures. Resin acids have two functional groups, [[carboxyl]] group and double bonds. Nearly all have the same basic skeleton: a 3-ring fused system with the empirical formula C<sub>19</sub>H<sub>29</sub>COOH.
==Natural occurrence==
[[Pine]]s contain numerous vertical and radial resin ducts scattered throughout the entire wood. The accumulation of resin in the [[heartwood]] and resin ducts causes a maximum concentration in the base of the older trees. Resin in the [[sapwood]], however, is less at the base of the tree and increases with height.
Natural resins are water-insoluble mixtures of compounds, many of which have a hydroaromatic structure. Mixtures of isomeric [[carboxylic acid]]s, such as [[abietic acid|abietic]] and [[pimaric acid]]s, which occur in [[rosin]] in nature in [[solvent]]-free form, in the form of [[Sap (plant)|tree sap]] or wood rosin such as pine [[oleoresin]], where they are dissolved in [[terpene|terpenic]] [[hydrocarbon]]s. They can also be present as [[fossil]] [[coal]] or [[copal]] resins, in old pine tree stumps, etc.
==Chemical characteristics==
Resin acids occur in pines in a number of isomeric forms having the molecular formula C<sub>19</sub>H<sub>29</sub>COOH and in some related structures.
The most prevalent resin acids are:
===Abietic-type acids===
[[Image:Abietic acid.svg|thumb|right|Abietic acid]]
*[[abietic acid]]
**abieta-7,13-dien-18-oic acid
**13-isopropylpodocarpa -7,13-dien-15-oic acid
*[[neoabietic acid]]
*[[dehydroabietic acid]]
*[[palustric acid]]
*simplified formula C<sub>20</sub>H<sub>30</sub>O<sub>2</sub>, or C<sub>19</sub>H<sub>29</sub>COOH
*represents the majority 85-90% of typical [[tall oil]].
*structurally shown as (CH<sub>3</sub>)<sub>4</sub>C<sub>15</sub>H<sub>17</sub>COOH
*[[molecular weight]] 302
===Pimaric-type acids===
[[Image:Pimaric acid.png|frame|right|Pimaric acid]]
*[[pimaric acid]]
**pimara-8(14),15-dien-18-oic acid
*[[levopimaric acid]]
*[[isopimaric acid]]s
*simplified formula C<sub>20</sub>H<sub>30</sub>O<sub>2</sub> or C<sub>19</sub>H<sub>29</sub>COOH
*structurally represented as (CH<sub>3</sub>)<sub>3</sub>(CH<sub>2</sub>)C<sub>15</sub>H<sub>18</sub>COOH
*molecular weight 302
==Production in tall oil (chemical pulping byproduct)==
Commercially, the manufacture of [[wood pulp]] grade chemical cellulose using the kraft chemical pulping processes releases these resin acid compounds. The [[Kraft process]] is conducted under strongly basic conditions of [[sodium hydroxide]], [[sodium sulfide]] and [[sodium hydrosulfide]] which neutralizes these resin acids, converting them to their respective sodium salts, sodium abietate, ((CH<sub>3</sub>)<sub>4</sub>C<sub>15</sub>H<sub>17</sub>COONa) sodium pimarate ((CH<sub>3</sub>)<sub>3</sub>(CH<sub>2</sub>)C<sub>15</sub>H<sub>23</sub>COONa) and so on. In this form, the sodium salts are insoluble and, being of lower density than the spent pulping process liquor, float to the surface of storage vessels during the process of concentration, as a somewhat gelatinous pasty fluid called [[kraft soap]], or [[resin soap]].
Kraft soap can be reneutralized in the presence of concentrated [[sulfuric acid]] to restore the acidic forms [[abietic acid]], [[palmiric acid]] and their isomers which form the resin acid component of a pulping byproduct called [[tall oil]]. Other major components include fatty acids and [[unsaponifiable]] [[sterol]]s.
Resin acids, because of the same protectant nature they provide in the trees where they originate, also impose toxic implications on the effluent treatment facilities in pulp manufacturing plants. Furthermore, any residual resin acids that pass the treatment facilities add toxicity to the stream discharged to the receiving waters.
==Variation with species and biogeoclimatic zone==
The chemical composition of tall oil varies with the species of trees used in pulping, and in turn with geographical location. For example, the coastal areas of the southeastern United States have a high proportion of [[Slash Pine]] (''Pinus elliottii''); inland areas of the same region have a preponderance of [[Loblolly Pine]] (''Pinus taeda''). Slash Pine generally contains a higher concentration of resin acids than Loblolly Pine.
In general, the tall oil produced in coastal areas of the southeastern United States contains over 40% resin acids and sometimes as much as 50% or more. The [[fatty acid]]s fraction is usually lower than the resin acids, and unsaponifiables amount to 6-8%. Farther north in [[Virginia]], the resin acid content decreases to as low as 30-35% with a corresponding increase in the fatty acids present.
Still farther north in [[Canada]], where mills process [[Lodgepole Pine]] (''Pinus contorta'') [[Jack Pine]] (''Pinus banksiana''), [[Eastern White Pine]] (''Pinus strobus'') and [[Red Pine]] (''Pinus resinosa''), resin acid levels of 25% are common with unsaponifiable contents of 12-25%. Similar variations may be found in other parts of the United States and in other countries. For example, resin acid values from [[Scots Pine]] (''Pinus sylvestris'') in [[Finland]] may vary from 20 to 50%, fatty acids from 35 to 70 %, and unsaponifiables from 6 to 30%.
In 2005, as an infestation of the [[Mountain pine beetle]] (''Dendroctonus ponderosae''), devastated the Lodgepole Pine forests of northern interior [[British Columbia]], Canada, resin acid levels three to four times greater than normal were detected in infected trees, prior to death. These increased levels are based on the fact that a tree uses the resins as a defense. Resins are both toxic to the beetle and the fungus and also can entomb the beetle in diterpene remains from secretions. Increasing resin production has been proposed as a way to slow the spored of the beetle in the "Red Zone" or the wildlife urban interface.
[[Category:Biomolecules]]
[[Category:Acids]]
[[Category:Resins]]
[[de:Harzsäure]]
[[fr:Acide résinique]]