Rigid-hulled inflatable boat
491456
218943984
2008-06-12T21:38:18Z
72.242.47.82
/* References */
{{Unreferenced|date=August 2007}}
[[Image:rigid hulled inflatable boat.jpg|thumb|right|Two RIBs at Castletown, Portland, England.]]
[[Image:us navy rhib.jpg|thumb|right|[[US Navy]] RHIB deployed from [[USS Cole (DDG-67)|USS ''Cole'']].]]
A '''rigid-inflatable boat''' ('''RIB''') or '''rigid-hulled inflatable boat''', ('''RHIB''') is a light-weight but high performance and high capacity [[boat]] constructed with a solid, shaped [[hull (ship)|hull]] and flexible tubes at the [[gunwale]]. The design is stable and seaworthy. The inflatable collar means that [[buoyancy]] is not lost if a large quantity of water is shipped aboard. The RIB is a development of the [[inflatable boat]].
==General characteristics==
RIBs are commonly 4 to 9 metres (13 to 28 ft) long, although they can range in length between 2.5 and 18 metres (7.5 and 55 ft). A RIB is often propelled by one or more [[outboard motor]]s or an inboard [[internal combustion engine|motor]] turning a [[pump-jet|water jet]] or [[z-drive]]. Generally the power of the motors is in the range of 5 to 500 [[horse power]] (4 to 373 kW).
RIBs are used as [[rescue craft]], safety boats for sailing, [[dive boat]]s or [[Ship's tender|tenders]] for larger boats and ships. Their shallow draught, high maneuverability, speed and relative immunity to damage in low speed collisions are advantages in these applications.
RIBs up to about 7 metres in length can be towed on [[Trailer (vehicle)|trailers]] on the road, making them attractive as leisure craft.
==Performance==
{{Disputed-section|date=May 2008}}
[[Image:Zodiac in Greenland.jpg||thumb|250px|A ZODIAC brand inflatable boat in [[Greenland]]]]
RIBs are generally designed with [[planing (sailing)|hydroplaning]] hulls. Due to their low weight RIBs often out-perform other similarly sized and powered boats, and can also cope with rougher seas.
The maximum speed of the RIB depends on its weight, power, load, and sea conditions. A typical 6 metre RIB, with six passengers, 110 [[horsepower]] engines, in the sea in [[Beaufort scale|Beaufort]] force 2 is very likely to have a top speed of around 30 [[Knot (speed)|knot]]s. High performance RIBs may operate with a speed between 40 and 70 knots, depending on the size and weight. Certain companies operating out of holiday destinations use RIBs as a "wave jumper". This is a standard RIB of about 10 metres in length, with two parallel rows of seating down the centre of the craft. It is propelled by two engines, with the aim being to get the craft to roughly 30-40 knots before jumping off the tops of waves.
==Construction==
===Hull===
The hull is made of [[steel]], [[wood]], [[aluminium]], or more commonly, a combination of wood for the structure and [[glass-reinforced plastic]] (GRP) composite for the shaped and smooth surface. The hull of a RIB is shaped to increase the performance of the boat in the water by optimising its [[planing (sailing)|hydroplaning]] characteristics. "Deep-V" hulls cut through waves easily but require greater engine power to start planing than "shallow-V" hulls, which plane at lower speed but with a more uncomfortable ride.
===Tubes===
The tubes are usually constructed in separate sections to reduce the effect of a puncture, each with a [[valve]] to add or remove air. Common materials for the tubes are Polyvinyl chloride, Polyurethane and Hypalon.
{{Disputed-section|date=March 2008}}
* '''Polyvinyl chloride'''
As a material for building tubes, [[polyvinylchloride]] (PVC) has the disadvantage of lacking flexibility. To make it supple, an additive is used with the [[polymer]]. This additive [[vaporise]]s as the material ages, making the PVC brittle and allowing it to crack easily. A PVC tube is the cheapest option and lasts approximately five years.
* '''Polyurethane'''
Tubes made of [[polyurethane]] (PU) are difficult to manufacture and hard to repair. PU has the great advantage of being very tough, it can be made knife-proof or [[bulletproof]]. Unfortunately to make PU airtight, it has to be used in layers, combined with [[neoprene]]. The biggest disadvantage with PU is that it ages quickly: thermal and mechanical wear-and-tear and exposure to [[ultraviolet]]-light are problems. A high quality PU-made tube lasts 10 to 15 years.
PU tubes are often to be found on commercial RIBs, in applications where strength and durability are needed. Replacing the tubes when they wear out, usually costs one third of the complete RIB.
* '''Hypalon'''
Tubes made of [[Hypalon]] are easy to manufacture and can be repaired with simple puncture repair kits.
Hypalon is not airtight and so must be combined with [[Neoprene]] when used to build tubes. Tubes made with Hypalon and Neoprene layers can last 30 years or more.
Although early in its life a PU tube will be stronger than a Hypalon / Neoprene tube, by the age of 5 years they have similar levels of durability, which is why Hypalon/Neoprene tubes are often to be found on RIBs that are owned by commercial and high value leisure users.
A 3 part instructional video of RIB Tube construction may be viewed at [http://www.youtube.com/visualpercepts]
===Wheelhouse/cabins===
Larger RIBs can have hard-tops or wheelhouses made of GRP or [[aluminium]]. Wheelhouses offer protection from the elements to both the crew and passengers - and can also protect equipment such as suspension seats and navigation equipment. Some RIB manufacturers, particularly those popular in Ireland and the West Coast of Scotland provide optional canopies which form fabric and perspex wheelhouses but can be easily removed in good weather. Increasingly, RIBs are becoming available with small cabins (usually with accommodation for 2 people and in some cases sea toilets or [[chemical toilets]]), widening the application of RIBs as cruising craft.
[[Image:Falmouth irb 02.jpg|thumb|right|[[Royal National Lifeboat Institution|RNLI]] inshore rescue boat during [[Falmouth, Cornwall|Falmouth]] Lifeboat Day, August 2006.]]
==History==
:''See [[Inflatable boat#History|Inflatable boat - History]] for earlier history.''
The combination of rigid hull and large inflatable buoyancy tubes seems to have been first introduced in [[1967]] by Tony and Edward Lee-Elliott [http://www.hotribs.com/02articles/000-bellows/01_pt1.asp], and patented by Admiral [[Hoare]] in [[1969]] after research and development at [[Atlantic College]] in [[Wales]]. RIBs then were introduced for the first time [http://www.hants.gov.uk/gafirs/NEW01/history.html] as [[Lifeboat (rescue)|lifeboat]]s on the [[Solent]], [[England]] in [[1970]] by the League of Venturers Search and Rescue and also the Gosport and Fareham Inshore Rescue Service.
Today there are about a thousand manufacturers of RIBs and inflatables. Other common brands include Walker Bay, [[Avon Inflatables, Ltd|Avon]], AB & Apex. About fifty RIB manufacturers are in the UK.
==Rigid Buoyant Boat (RBB) ==
[[Image:Rnli rbbs on thames at london.jpg|[[RNLI]] RBBs at Lifeboat Pier, [[River Thames]], London|thumb]]
Based on the concept of a [[RIB]] but with a tube/sponson manufactured from a solid material such as moulded [[polyethylene]] or [[aluminium]] and therefore being much more robust than the fabrics commonly used. Boats with foam filled collars such as the ''secure all-around flotation equipped'' (SAFE) boats<ref>www.safeboats.com</ref> employed by the US Coast Guard can also be classified as Rigid Buoyant Boats rather than "true" RIBs as the collar is solid foam rather than inflated. The handling tends to be very similar to a RIB; likewise they will remain afloat (buoyant) even if completely flooded. Aluminium RBBs tend to be [[bespoke]] (custom-made to specification) or low-volume products whilst the tooling cost of [[rotomold]]ed polyethylene boats tends to require these to be higher volume products. At least three manufacturers are producing rotomolded boats of this type.<ref>www.atlanticfocus.co.uk</ref><ref>www.marinerevolution.com</ref><ref>www.pioneerboats.com</ref> One supplier demonstrates the robustness of the [[boats]] by dropping one from a [[crane]] onto a [[concrete]] car park.<ref>www.marinerevolution.com</ref> The U.S. Navy’s [[small unit riverine craft]] and the Coast Guard’s [[USCG Defender class boat|Defender class 25-foot boat]]s are examples of RBBs.
==See also==
{{Commons|Category:RHIB|RHIB's}}
* [[Inflatable boat]]
* [[Luxury yacht tender]]
* [[Outboard motor]]
* [[Subskimmer]] for a RIB that can transform into a submerged [[Diver Propulsion Vehicle]] and back.
==References==
{{Reflist}}
www.silverships.com
==External links==
* [http://www.allinflatables.com/support/general.html AllInflatable's History of Inflatables]
[[Category:Boat types]]
[[el:RHIB]]
[[no:RIB]]