Screw axis 3656192 221273972 2008-06-23T20:25:25Z Davwillev 3505544 The '''screw axis''' ('''helical axis''' or '''twist axis''') of an [[object]] is a [[parameter]] for describing [[simultaneous]] [[rotation]] and [[translation]] components of that object. The [[axis angle|axis]] is a directed line in space, along which a translation may occur, and about which rotation may occur. As an axis, this parameter cannot describe pure translation with no rotation component. As this axis can vary over time, the term 'instantaneous helical axis' (IHA) is often used. When dealing with motion in a single plane, the terms instantaneous axis of rotation (IAR), or instantaneous center of rotation (ICR), are commonly used. ==Mathematics== A '''screw operation''' is the combination of a rotation by some angle ''&phi;'' about an axis (called the '''screw axis'''), combined with a translation by some distance ''d'' along the axis. A positive rotation direction usually means one that corresponds to the translation direction by the [[right-hand rule]]. Except for ''&phi;'' = 180°, we have to distinguish a screw operation from its [[mirror image]]. Unlike for rotations, a righthand and lefthand screw operation even generate different groups. The combination of a rotation about an axis and a translation in a perpendicular direction is a rotation about a parallel axis. However, a screw operation with a nonzero translation vector along the axis cannot be reduced like that. Thus the effect of a rotation combined with ''any'' translation is a screw operation in the general sense, with as special cases a pure translation. a pure rotation, and the identity. Together these are all the direct [[Euclidean_group#Overview_of_isometries_in_up_to_three_dimensions|isometries in 3D]]. '''Screw axis symmetry''' is invariance under a screw operation. If ''&phi;'' = 360°/''n'' for some positive integer ''n'', then screw axis symmetry implies [[translational symmetry]] with a translation vector which is ''n'' times that of the screw operation. Applicable for [[space group]]s is a rotation by 360°/''n'' about an axis, combined with a translation along the axis by a multiple of the distance of the translational symmetry, divided by ''n''. This multiple is indicated by a subscript. So, 6<sub>3</sub> is a rotation of 60° combined with a translation of 1/2 of the lattice vector, implying that there is also 3-fold [[rotational symmetry]] about this axis. The possibilities are 2<sub>1</sub>, 3<sub>1</sub>, 4<sub>1</sub>, 4<sub>2</sub>, 6<sub>1</sub>, 6<sub>2</sub>, and 6<sub>3</sub>, and the enantiomorphous 3<sub>2</sub>, 4<sub>3</sub>, 6<sub>4</sub>, and 6<sub>5</sub>. ===Continuous case=== A non-discrete screw axis [[isometry group]] contains all combinations of a rotation about some axis and a proportional translation along the axis (in [[rifling]], the constant of proportionality is called the [[twist rate]]); in general this is combined with ''k''-fold rotational isometries about the same axis (''k'' &ge; 1); the set of images of a point under the isometries is a ''k''-fold [[helix]]; in addition there may be a 2-fold rotation about a perpendicularly intersecting axis, and hence a ''k''-fold helix of such axes. ==Mechanics== The motion of a [[rigid body]] may be the combination of rotation about an axis (the screw axis) and a translation along that axis. This screw move is characterized by the velocity vector for the translation and the [[angular velocity]] vector in the same or opposite direction. If these two vectors are constant and along one of the [[Moment_of_inertia#Inertia_tensor|principal axes]] of the body, no external forces are needed for this motion (moving and [[Spin (physics)|spinning]]). As an example, if gravity and drag are ignored, this is the motion of a [[bullet]] fired from a [[rifling|rifled]] [[gun]]. ===Biomechanics=== This parameter is often used in [[biomechanics]], when describing the motion of [[joints]] of the body. For any period of time, joint motion can be seen as the movement of a single point on one articulating surface with respect to the adjacent surface (usually [[distal]] with respect to [[proximal]]). The total translation and rotations along the path of motion can be defined as the time integrals of the instantaneous translation and rotation velocities at the IHA for a given reference time.<ref>Woltring HJ, de Lange A, Kauer JMG, Huiskes R. 1987 Instantaneous helical axes estimation via natural, cross-validated splines. In: Bergmann G, Kölbel R, Rohlmann A (Editors). Biomechanics: Basic and Applied Research. Springer, pp 121-128.</ref> In any single [[plane (mathematics)|plane]], the path formed by the locations of the moving helical axis is known as the 'centroid' and is used in the description of joint motion. ==Crystallography== [[Image:Te chains.png|thumb|200px|3<sub>1</sub> screw axis in crystal structure of tellurium]] In [[crystallography]], a '''screw axis''' is a symmetry operation describing how a combination of rotation about an axis and a translation parallel to that axis leaves a crystal unchanged.<ref>{{cite book | author=Walter Borchardt-Ott | title=Crystallography | publisher=Springer-Verlag | year=1995 | id=ISBN 3-540-59478-7}}</ref> Screw axes are noted by a number, ''n'', where the angle of rotation is 360°/''n''. The degree of translation is then added as a subscript showing how far along the axis the translation is, as a portion of the parallel lattice vector. For example, 2<sub>1</sub> is a 180° (two-fold) rotation followed by a translation of 1/2 of the lattice vector. 3<sub>1</sub> is a 120° (three-fold) rotation followed by a translation of 1/3 of the lattice vector. The possible screw axes are 2<sub>1</sub>, 3<sub>1</sub>, 4<sub>1</sub>, 4<sub>2</sub>, 6<sub>1</sub>, 6<sub>2</sub>, and 6<sub>3</sub>, and the [[chirality (mathematics)|enantiomorphous]] 3<sub>2</sub>, 4<sub>3</sub>, 6<sub>4</sub>, and 6<sub>5</sub>. ==See also== *{{ml|Symmetry|Helical_symmetry|Helical symmetry}} *[[Screw theory]] *[[Space group]] *[[Corkscrew (roller coaster element)]] ==References== <!--<nowiki> See http://en.wikipedia.org/wiki/Wikipedia:Footnotes for an explanation of how to generate footnotes using the <ref> and </ref> tags, and the template below. </nowiki>--> <references/> [[Category:Symmetry]] [[Category:Crystallography]] [[Category:Rigid bodies]] [[Category:Euclidean geometry]] [[Category:Classical mechanics]] [[Category:Orientation]]